Operation Manual

0458-708-0121-A
16
English 11 Mit der Strauchschere arbeiten
► If the cutting blades continue to run after 1 second:
Remove the battery and contact your STIHL servicing
dealer.
There is a malfunction in the shrub shears.
11.1 Holding and Controlling the Shrub Shears
► Hold the blower with one hand on the control handle -
wrap your thumb around the handle.
► Keep your free hand away from the cutting blades.
11.2 Cutting Shrubs
► Mount the shrub shear blade.
► Use lopping shears, a hedge trimmer or chainsaw to cut
out thick branches first.
► Swing the shrub shears from the bottom upwards in an arc
while making the cut.
► Lower the shrub shears without cutting.
► Walk slowly and steadily forwards.
► Swing the shrub shears from the bottom upwards in an arc
while making the cut.
► Cut the other side of the shrub in the same way.
► Hold the cutting blades at an angle of 0° to 10° to the top
of the shrub.
► Swing the shrub shears horizontally and in an arc while
making the cut.
► If cutting performance deteriorates: Sharpen the cutting
blades.
11.3 Cutting Grass
► Mount the grass shear blade.
11 Mit der Strauchschere arbeiten
0000-GXX-4025-A0
0 - 10°
0000-GXX-4026-A1
0000-GXX-4030-A0