Instruction Manual

there is otherwise a risk of fire from uncontained
sparking.
To reduce the risk of fire, do not service or store
your machine near open flames.
Check the fuel filler cap for leaks at regular inter‐
vals.
Use only a spark plug of the type approved by
STIHL and make sure it is in good condition –
see "Specifications".
Inspect the ignition lead (insulation in good con‐
dition, secure connection).
Check the condition of the muffler.
To reduce the risk of fire and damage to hearing,
do not operate your machine if the muffler is
damaged or missing.
Do not touch a hot muffler since burn injury will
result.
Vibration behavior is influenced by the condition
of the AV elements – check the AV elements at
regular intervals.
3 Using the Unit
3.1 HS 82 R
The HS 82 R is designed for cutting hedges and
shrubs with thicker stems and branches.
3.2 HS 82 T
The HS 82 T is designed for shaping and trim‐
ming hedges and shrubs with thinner branches.
Use the HS 82 R hedge trimmer for cutting hed‐
ges with thicker branches.
3.3 Cutting Season
Observe country-specific or municipal rules and
regulations for cutting hedges.
Do not use your power tool during other people's
normal rest periods.
3.4 Cutting Sequence
Use lopping shears or a chain saw to cut out
thick branches first.
Cut both sides of the hedge first, then the top.
3.5 Disposal
Do not throw cuttings in the garbage can – they
can be composted!
3.6 Working Technique
3.6.1 Vertical Cut
Swing the cutting blade from the bottom upwards
in an arc – lower the nose of the blade, move
along the hedge and then swing the blade up
again in an arc.
3 Using the Unit English
0458-448-0121-C 7