Instruction Manual

–
Damage to the machine resulting from the use
of poor quality replacement parts.
15.2 Parts Subject to Wear and Tear
Some parts of the power tool are subject to nor‐
mal wear and tear even during regular operation
in accordance with instructions and, depending
on the type and duration of use, have to be
replaced in good time. Among other parts, this
includes:
–
Cutting blades
–
Clutch
–
Filters (air, fuel)
–
Rewind starter
–
Spark plug
–
Components of antivibration system
16 Main Parts
10
1
12
14
7
3
11
2
4
8
9
13
6
5
15
16
17
#
18
19
0000-GXX-1821-A0
1 Starter Grip
2 Rear Handle
3 Throttle Trigger Lockout
4 Throttle Trigger
5 Handle Lock
6 Filter Cover
7 Manual Fuel Pump
8 Spark Plug Boot
9 Front Handle
10 Carburetor Adjusting Screws
11 Stop Switch
12 Fuel Tank Cap
13 Fuel tank
14 Muffler
15 Fan Housing
16 Choke Lever
17 Blade Scabbard
18 Cutter Guard
19 Cutting Blades
# Serial Number
17 Specifications
17.1 Engine
STIHL single cylinder two-stroke engine
Displacement:
22.7 cc
Bore: 34 mm
Stroke: 25 mm
Engine power to ISO 7293: 0.7 kW (1 bhp) at
8,500 rpm
Idle speed: 2,800 rpm
Cut-off speed: 9,300 rpm
17.2 Ignition System
Electronic magneto ignition
Spark plug (resistor type): NGK CMR6H,
BOSCH USR 4 AC
Electrode gap: 0.5 mm
17.3 Fuel System
All position diaphragm carburetor with integral
fuel pump
Fuel tank capacity:
460 cc (0.46 l)
17.4 Weight
complete with cutting attachment, dry, without
blade scabbard
17.4.1 HS 82 T
500 mm blade: 4.9 kg
600 mm blade: 5.1 kg
750 mm blade: 5.3 kg
17.4.2 HS 82 R
600 mm blade: 5.3 kg
750 mm blade: 5.6 kg
17.4.3 HS 82 RC
600 mm blade: 5.3 kg
750 mm blade: 5.7 kg
17.5 Cutting blades
Sharpening angle to horizontal: 45°
17.6 Noise and Vibration Data
Noise and vibration data are measured at idling
and maximum rated speed in a ratio of 1:4.
For further details on compliance with Vibration
Directive 2002/44/EC visit www.stihl.com/vib.
17.6.1 Sound pressure level L
p
to ISO 22868
HS 82 T
500 mm blade: 95 dB(A)
English 16 Main Parts
18 0458-448-0121-C