Instruction Manual
Table Of Contents
- STIHL HLA 66, 86
- 1 Vorwort
- 2 Informationen zu dieser Gebrauchsanleitung
- 3 Übersicht
- 4 Sicherheitshinweise
- 5 Heckenschneider einsatzbereit machen
- 6 Akku laden und LEDs
- 7 Heckenschneider zusammenbauen
- 8 Akku einsetzen und herausnehmen
- 9 Heckenschneider einschalten und ausschalten
- 10 Heckenschneider und Akku prüfen
- 11 Mit dem Heckenschneider arbeiten
- 12 Nach dem Arbeiten
- 13 Transportieren
- 14 Aufbewahren
- 15 Reinigen
- 16 Warten
- 17 Reparieren
- 18 Störungen beheben
- 19 Technische Daten
- 20 Kombinationen aus Tragsystemen
- 21 Ersatzteile und Zubehör
- 22 Entsorgen
- 23 EU-Konformitätserklärung
- 24 Anschriften
- 25 Allgemeine Sicherheitshinweise für Elektrowerkzeuge
- 25.1 Einleitung
- 25.2 Arbeitsplatzsicherheit
- 25.3 Elektrische Sicherheit
- 25.4 Sicherheit von Personen
- 25.5 Verwendung und Behandlung des Elektrowerkzeugs
- 25.6 Verwendung und Behandlung des Akkuwerkzeugs
- 25.7 Service
- 25.8 Sicherheitshinweise für Heckenscheren
- 25.9 Zusätzliche Sicherheitshinweise für Heckenscheren mit verlängerter Reichweite
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 5 Preparing Hedge Trimmer for Operation
- 6 Charging the Battery, LEDs
- 7 Assembling the Hedge Trimmer
- 8 Removing and Fitting the Battery
- 9 Switching the Hedge Trimmer On/Off
- 10 Testing the Hedge Trimmer and Battery
- 11 Operating the Hedge Trimmer
- 12 After Finishing Work
- 13 Transporting
- 14 Storing
- 15 Cleaning
- 16 Maintenance
- 17 Repairing
- 18 Troubleshooting
- 19 Specifications
- 20 Combinations of Carrying Systems
- 21 Spare Parts and Accessories
- 22 Disposal
- 23 EC Declaration of Conformity
- 24 General Power Tool Safety Warnings
- 1 Préface
- 2 Informations concernant la présente Notice d'emploi
- 3 Vue d'ensemble
- 4 Prescriptions de sécurité
- 5 Préparatifs avant l'utilisation du coupe-haies
- 6 Recharge de la batterie et DEL
- 7 Assemblage du coupe-haies
- 8 Introduction et extraction de la batterie
- 9 Mise en marche et arrêt du coupe-haies
- 10 Contrôle du coupe-haies et de la batterie
- 11 Travail avec le coupe-haies
- 12 Après le travail
- 13 Transport
- 14 Rangement
- 15 Nettoyage
- 16 Maintenance
- 17 Réparation
- 18 Dépannage
- 19 Caractéristiques techniques
- 20 Combinaisons de systèmes de portage
- 21 Pièces de rechange et accessoires
- 22 Mise au rebut
- 23 Déclaration de conformité UE
- 24 Indications générales de sécurité pour outils électroportatifs
- 24.1 Introduction
- 24.2 Sécurité à l'endroit de travail
- 24.3 Sécurité sur le plan électrique
- 24.4 Sécurité des personnes
- 24.5 Utilisation et emploi soigneux d'outils électroportatifs
- 24.6 Utilisation et emploi soigneux d'outils électroportatifs sans fil
- 24.7 Service après-vente
- 24.8 Consignes de sécurité applicables aux taille-haies
- 24.9 Consignes de sécurité supplémentaires applicables aux taille-haies télescopiques
- 1 Premessa
- 2 Informazioni sulle presenti Istruzioni d’uso
- 3 Sommario
- 4 Avvertenze di sicurezza
- 5 Preparare il tosasiepi
- 6 Carica della batteria e LED
- 7 Assemblare il tosasiepi
- 8 Inserire e togliere la batteria
- 9 Accendere e spegnere il tosasiepi
- 10 Controllare tosasiepi e batteria
- 11 Lavorare con il tosasiepi
- 12 Dopo il lavoro
- 13 Trasporto
- 14 Conservazione
- 15 Pulizia
- 16 Manutenzione
- 17 Riparazione
- 18 Eliminazione dei guasti
- 19 Dati tecnici
- 20 Combinazioni di sistemi di trasporto
- 21 Ricambi e accessori
- 22 Smaltimento
- 23 Dichiarazione di conformità UE
- 24 Avvertenze di sicurezza generali per attrezzi elettrici
- 24.1 Introduzione
- 24.2 Sicurezza sul posto di lavoro
- 24.3 Sicurezza elettrica
- 24.4 Sicurezza delle persone
- 24.5 Impiego e maneggio dell’attrezzo elettrico
- 24.6 Impiego e trattamento dell’attrezzo a batteria
- 24.7 Assistenza
- 24.8 Avvertenze di sicurezza per tagliasiepi
- 24.9 Avvertenze di sicurezza per tagliasiepi aggiuntive per tagliasiepi con portata maggiorata
- 1 Voorwoord
- 2 Informatie met betrekking tot deze handleiding
- 3 Overzicht
- 4 Veiligheidsinstructies
- 5 Heggensnoeier klaar maken voor gebruik
- 6 Accu laden en leds
- 7 Heggensnoeier monteren
- 8 Accu aanbrengen en wegnemen
- 9 Heggensnoeier inschakelen en uitschakelen
- 10 Heggensnoeier en accu controleren
- 11 Met de heggensnoeier werken
- 12 Na de werkzaamheden
- 13 Vervoeren
- 14 Opslaan
- 15 Reinigen
- 16 Onderhoud
- 17 Repareren
- 18 Storingen opheffen
- 19 Technische gegevens
- 20 Combinaties van draagsystemen
- 21 Onderdelen en toebehoren
- 22 Milieuverantwoord afvoeren
- 23 EU-conformiteitsverklaring
- 24 Algemene veiligheidswaarschuwingen voor elektrische gereedschappen
- 24.1 Inleiding
- 24.2 Veiligheid op de werkplek
- 24.3 Elektrische veiligheid
- 24.4 Veiligheid van personen
- 24.5 Gebruik en behandeling van het elektrische gereedschap
- 24.6 Gebruik en behandeling van het accugereedschap
- 24.7 Service
- 24.8 Veiligheidsinstructies voor heggenscharen
- 24.9 Aanvullende veiligheidsinstructies voor heggenscharen op steel
6.3 LEDs on Battery
The LEDs can show the state of charge or mal‐
functions. The LEDs can glow or flash green or
red.
The state of charge is indicated when the LEDs
glow or flash green.
► If the LEDs glow or flash red: Troubleshooting,
18.
There is a malfunction in hedge trimmer or
battery.
7 Assembling the Hedge
Trimmer
7.1 Mounting the Loop Handle
(HLA 66)
► Switch off the long-reach hedge trimmer and
remove the battery.
7
4
6
1
1
2
2
5
3
7
0000097231_001
► Fit the clamp (4) in the loop handle (3).
► Place the loop handle (3) with clamp (4) on the
shaft (5).
► Fit the washers (2) on the screws (1).
► Press the clamp (6) against the shaft (5).
► Insert the screws (1) through holes in the loop
handle (3) and clamps (4 and 6).
► Fit and tighten down the nuts (7) firmly.
8 Removing and Fitting the
Battery
8.1 Inserting the battery
1
2
0000-GXX-2991-A0
► Insert the battery (1) up to the limit stop into
the battery compartment (2).
The battery (1) engages with a click and is
now locked.
8.2 Removing the Battery
► Lay the long-reach hedge trimmer on a level
surface.
► Keep one hand in front of the battery compart‐
ment so that the battery (2) cannot fall out.
1
1
2
0000097076_001
► Press both locking levers (1).
The battery (2) is released and can be
removed.
9 Switching the Hedge Trim‐
mer On/Off
9.1 Switching on the long-reach
hedge trimmer
► Hold the long-reach hedge trimmer with one
hand on the control handle - wrap your thumb
around the handle.
► Hold the long-reach hedge trimmer firmly with
your other hand on the loop handle or handle
hose - wrap your thumb around the loop han‐
dle or handle hose.
1
3
2
0000-GXX-6519-A1
► Push the release slide (1) in the direction of
the cutting blades with your thumb and hold it
there.
► Press the trigger (2) with your index finger and
keep depressed.
The long-reach hedge trimmer accelerates
and the cutting blades run.
The release slide can be released (1).
If the ergo lever (3) is pressed, the trigger switch
(2) remains unlocked. This means the trigger can
be released and depressed again without having
7 Assembling the Hedge Trimmer English
0458-185-9621-B 31