Instruction Manual

HLA 65, HLA 85
English
27
Maintenance and Care
The following intervals apply to normal operating conditions only. If your daily work-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
Move the retaining latch to
ƒ and remove the battery before performing any work
on the power tool.
before starting work after finishing work or daily weekly monthly every 12 months if problem if damaged as required
Complete machine
Visual inspection (condition) X
Clean X
Controls (retaining latch, trigger lockout
and trigger)
Check operation X
Clean XX
Cooling air inlet
Visual inspection X
Clean X
All accessible screws and nuts Re-tighten X
Battery Visual inspection XXX
Battery compartment
Clean XX
Check operation (eject battery) XX
Cutting blades
Visual inspection XXX
Clean
1)
X
Sharpen XX
Gear assembly and connecting rod
Have checked by servicing dealer
2)
after
every 50 hours of operation
Have STIHL gear grease replenished
every 50 hours of operation by servicing
dealer
2)
Safety labels Replace X
1)
Spray with STIHL resin solvent after cleaning
2)
STIHL recommends an authorized STIHL servicing dealer.