Instruction Manual

HLA 65, HLA 85
English
25
N Release the trigger switch
lockout (1) and the trigger
switch (2).
N Move the retaining latch (3) to ƒ –
the trigger switch (2) cannot be
operated – the power tool is locked
to prevent start-up.
Always remove the battery from the
power tool during work breaks and after
finishing work.
Removing the battery
N Press in both locking tabs (4) at the
same time to unlock the battery (5).
N Take the battery (5) out of the
housing.
When the power tool is not in use, shut it
off so that it does not endanger others.
Secure it against unauthorized use.
N Move the retaining latch to ƒ.
N Remove the battery.
N Clean the cutting blades, check
condition and spray them with
STIHL resin solvent.
N Fit the blade scabbard.
N Thoroughly clean the machine,
especially the cooling air inlets.
N Store the machine in a dry and
secure location out of the reach of
children and other unauthorized
persons.
Cover for battery compartment (special
accessory)
The cover prevents dirt falling into the
empty battery compartment.
N After finishing work, slide the
cover (1) home until it engages
audibly in position.
Switching Off
2
1
3905BA014 KN
3
3905BA015 KN
2
4
4
3905BA016 KN
Storing the Machine
3905BA027 KN
1