Instruction Manual

Table Of Contents
0458-816-9821-B
43
English
10 Testing the Hedge Trimmer and Battery
Push the release slide (1) in the direction of the cutting
blades with your thumb and hold it there.
Depress the Ergo lever (2) with your hand and hold it
there.
You can let go of the release slide (1).
Pull the trigger (3) with your index finger and hold it there.
The motor accelerates and the cutting blades run.
9.2 Switching Off
Release the trigger and Ergo lever
Wait until the cutting blades come to a complete standstill
after about 1 second.
If the cutting blades continue to run after about 1 second:
Remove the battery and contact your STIHL dealer for
assistance.
There is a malfunction in the hedge trimmer.
10.1 Checking the Controls
Release slide, Ergo lever and trigger
Remove the battery.
Attempt to pull the trigger lever without operating the
release slide.
If the trigger can be pulled: Do not use the hedge trimmer
and contact your STIHL dealer for assistance.
The release slide has a malfunction.
Push the release slide in the direction of the cutting blades
with your thumb and hold it there.
Depress the Ergo lever and hold it in that position.
Pull the trigger.
You can let go of the release slide.
Release the trigger and Ergo lever
If the release slide, trigger or the Ergo lever is stiff or does
not spring back to the idle position: Do not use the hedge
trimmer and contact your STIHL dealer for assistance.
The release slide, trigger or the Ergo lever is defective.
Switching on the hedge trimmer
Fit the battery.
Push the release slide in the direction of the loop handle
and hold it there.
Depress the Ergo lever and hold it in that position.
Pull the trigger and hold it there.
The cutting blades run.
If 3 LEDs flash red: Remove the battery and contact your
STIHL dealer for assistance.
There is a malfunction in the hedge trimmer.
Release the trigger.
The cutting blades stop running after about 1 second.
If the cutting blades continue to run after about 1 second:
Remove the battery and contact your STIHL dealer for
assistance.
There is a malfunction in the hedge trimmer.
10.2 Testing the Battery
Press button on battery.
The LEDs glow or flash.
If the LEDs do not glow or flash: Do not use the battery
and contact your STIHL servicing dealer.
There is a malfunction in the battery.
10 Testing the Hedge Trimmer and
Battery
1
2
3
0000-GXX-6519-A0