Instruction Manual

0458-683-8621-A
5
English 3 Main Parts
1Drive Tube
Hedge trimmer shaft.
2 Front Handle
Handle for the operator's front hand.
3 Locking Lever
Secures the battery in the battery compartment.
4 Battery Compartment
Holds the battery.
5 Mounting Recess
Mounting area for a Smart Connector 2 A.
6 Trigger Switch Lockout
Must be depressed to allow activation of the trigger
switch.
7 Retaining Latch
For switching the hedge trimmer on and selecting the
power level.
8LEDs
Indicate the unit's power level.
9 Carrying Ring
For connecting a harness to the hedge trimmer.
10 Trigger Switch
Activates the cutting attachment when depressed.
11 Control Handle
Handle for the operator's rear hand.
12 Air Filter
Filters the air drawn into the motor.
13 Battery
Supplies electrical power to the motor.
14 Push Button
Activates the battery's LEDs.
15 Battery LEDs
Indicate the battery's state of charge and display error
messages regarding potential malfunctions in the battery
or power tool.
# Rating Plate
Contains electrical information and the product's serial
number.
Adjustable Cutting Attachment
1Screw Plug
Seals the grease filler opening at the gearbox.
2 Cutting blades
Steel blades for cutting hedges, shrubs and bushes.
3 Blade Scabbard
Covers the cutting blades to reduce the risk of injury from
inadvertent contact during transportation and storage.
4 Blade Adjustment Release
Unlocks the cutting attachment to allow angle
adjustment.
5 Blade Adjustment Grip
Used to set the cutting blades to the desired angle.
3
1
1
45
2
0000097758_001