Operation Manual

HL 92, HL 92 K
English
28
Engine
STIHL single cylinder two-stroke engine
Ignition System
Electronic magneto ignition
Fuel System
Weight
Cutting Blades
Noise and Vibration Data
Noise and vibration data are measured
at idling and maximum rated speed in a
ratio of 1:4.
For further details on compliance with
Vibration Directive 2002/44/EEC see
www.stihl.com/vib/
HL 0°, 500 mm / HL 0°, 600 mm /
HL 145°, 500 mm / HL 145°, 600 mm
The noise and vibration data of the
approved attachments are listed in the
instructions supplied with each
attachment.
The K-factor in accordance with
Directive 2006/42/EC is 2.5 dB(A) for
the sound pressure level and sound
power level; the K-factor in accordance
with Directive 2006/42/EC is 2.0 m/s
2
for the vibration measurement.
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
For information on compliance with the
REACH regulation (EC) No. 1907/2006
see www.stihl.com/reach.
Specifications
Displacement: 21.4 cc
Bore: 33 mm
Stroke: 25 mm
Engine power to
ISO 8893:
0.9 kW (1 bhp) at
8,500 rpm
Idle speed: 2,800 rpm
Cut-off speed
(rated): 9,300 rpm
Spark plug (resistor
type): NGK CMR6H
Electrode gap: 0.5 mm
Fuel tank capacity: 540 cc (0.54 l)
Dry weight with 0° gearbox, 500 mm
HL 92: 5.5 kg
HL 92 K: 5.0 kg
Dry weight with 0° gearbox, 600 mm
HL 92: 5.6 kg
HL 92 K: 5.1 kg
Dry weight with 145° adjustable gear-
box, 500 mm
HL 92: 5.9 kg
HL 92 K: 5.3 kg
Dry weight with 145° adjustable gear-
box, 600 mm
HL 92: 6.0 kg
HL 92 K: 5.4 kg
Type: Double-edged for
bidirectional
cutting
Cutting length: 500 mm, 600 mm
Tooth spacing: 34 mm
Tooth height: 22 mm
Sharpening angle: 45° to horizontal
Sound pressure level L
p
to ISO 22868
HL 92: 91 dB(A)
HL 92 K: 92 dB(A)
Sound power level L
w
to ISO 22868
HL 92: 106 dB(A)
HL 92 K: 106 dB(A)
Vibration measurement a
hv,eq
to
ISO 22867:
HL 92, left hand on handle hose:
Handle hose: 4.1 m/s
2
Control handle: 4.5 m/s
2
Vibration measurement a
hv,eq
to
ISO 22867:
HL 92, left hand on loop handle:
Loop handle: 6.1 m/s
2
Control handle: 5.4 m/s
2
Vibration measurement a
hv,eq
to
ISO 22867:
HL 92 K:
Handle hose: 5.8 m/s
2
Control handle: 6.3 m/s
2