Instruction Manual

HL 94, HL 94 K
English
28
HL 145° 600 mm:
HL 0° 500 mm:
HL 0° 600 mm:
HL 145° 500 mm:
HL 145° 600 mm:
The noise and vibration data of the
approved attachments are listed in the
instructions supplied with each
attachment.
The K-factor in accordance with
Directive 2006/42/EC is 2.0 dB(A) for
the sound pressure level and sound
power level; the K-factor in accordance
with Directive 2006/42/EC is 2.0 m/s
2
for the vibration level.
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
For information on compliance with the
REACH regulation (EC) No. 1907/2006
see www.stihl.com/reach.
Exhaust Emissions
The CO
2
value measured in the EU type
approval procedure is specified at
www.stihl.com/co2.
The measured CO
2
value was
determined on a representative engine
in accordance with a standardized test
procedure under laboratory conditions
and does not represent either an explicit
or implied guarantee of the performance
of a specific engine.
The applicable exhaust emission
requirements are fulfilled by the
intended usage and maintenance
described in this instruction manual. The
type approval expires if the engine is
modified in any way.
Vibration measurement a
hv,eq
to
ISO 22867:
HL 94, left hand on handle hose:
Handle hose: 4.9 m/s
2
Control handle: 4.9 m/s
2
Vibration measurement a
hv,eq
to
ISO 22867:
HL 94, left hand on loop handle:
Loop handle: 6.5 m/s
2
Control handle: 5.4 m/s
2
Vibration measurement a
hv,eq
to
ISO 22867:
HL 94 K:
Handle hose: 6.2 m/s
2
Control handle: 5.9 m/s
2
Vibration measurement a
hv,eq
to
ISO 22867:
HL 94 K:
Handle hose: 6.0 m/s
2
Control handle: 6.5 m/s
2
Vibration measurement a
hv,eq
to
ISO 22867:
HL 94 K:
Handle hose: 7.0 m/s
2
Control handle: 7.2 m/s
2
Vibration measurement a
hv,eq
to
ISO 22867:
HL 94 K:
Handle hose: 6.4 m/s
2
Control handle: 6.4 m/s
2