Instruction Manual

HL 94, HL 94 K
English
11
N Align the loop handle (2) and move
it to the most comfortable position
(recommended: about 20 cm).
N Tighten down the screws firmly.
Mounting the Gearbox
N Loosen the clamp screws (10).
N Push the gearbox (11) onto the
drive tube (5), turn the gearbox (11)
back and forth as necessary.
Once the end of the drive tube is
inserted beyond the slot in the
clamp (12):
N Push the gearbox (11) fully home as
far as stop.
N Tighten down the clamp screws
moderately.
N Line up the gearbox (11) with the
powerhead.
N Tighten down the clamp screws
firmly.
2
A
0000-GXX-1680-A0
11
10
10
5
0000-GXX-1681-A0
11
12
0000-GXX-1682-A0