Instruction Manual

HL 92, HL 92 K
English
24
Antivibration elements
Visual inspection
3)
XXX
Have replaced by servicing dealer
2)
X
Cutting blades
Visual inspection XX
Clean
4)
X
Sharpen
4)
XX
Gearbox lubrication
Check X
Replenish X
Safety labels Replace X
1)
Only if there is a noticeable loss of engine power
2)
STIHL recommends an authorized STIHL servicing dealer.
3)
see chapter "Inspections and Maintenance by Dealer", section "Antivibration Elements"
4)
Spray with STIHL resin solvent after cleaning
The following intervals apply to normal operating conditions only. If your daily work-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
before starting work after finishing work or daily after each refueling stop weekly monthly every 12 months if problem if damaged as required