Instruction Manual

HL 92, HL 92 K
English
20
Checking the Spark Plug
N Clean dirty spark plug.
N Check electrode gap (A) and
readjust if necessary – see
"Specifications".
N Rectify the problems which have
caused fouling of the spark plug.
Possible causes are:
– Too much oil in fuel mix.
– Dirty air filter.
– Unfavorable running conditions.
WARNING
Arcing may occur if the adapter nut (1) is
loose or missing. Working in an easily
combustible or explosive atmosphere
may cause a fire or an explosion. This
can result result in serious injuries or
damage to property.
N Use resistor type spark plugs with a
properly tightened adapter nut.
Installing the Spark Plug
N Fit the spark plug and tighten it
down firmly.
N Press the boot firmly onto the spark
plug.
N Fit the cap (1), insert the screw (2)
and tighten it down firmly.
Blade Drive Gear
Lubricate the blade drive gear with
STIHL gear lubricant for hedge trimmers
– see "Special Accessories".
HL 0° version
Adjustable HL 145° version
N Check the lubricant level at regular
intervals of about every 25 hours of
operation. Unscrew the filler
000BA039 KN
A
1
000BA045 KN
1
2
0208BA039 KN
Lubricating the Gearbox
1
0000-GXX-1687-A0
1
0000-GXX-1688-A0