Instruction Manual

GS 461
English
37
Antivibration elements
Check XX
Have them replaced by an authorized STIHL
dealer
X
Cooling air intake slits Clean X
Cylinder fins Clean XX
Carburetor
Check idle adjustment – chain must not rotate XX
Set the idle speed X
Spark plug
Adjust electrode gap X
Replace after 100 hours’ operation
All accessible screws, nuts and bolts (not adjusting
screws)
1)
Retighten X
Spark arresting screen (present only in some
countries)
Check X
Clean or replace if necessary X
Safety information labels Replace X
1)
During initial use, tighten the cylinder block screws after 10 to 20 hours of operation
2)
If diamond abrasive chain is mounted or changed
The following information applies under normal operating conditions. The specified intervals must be
shortened accordingly when working for longer than normal or under difficult cutting conditions
(extensive dust, etc.).
before starting work at the end of work and/or daily whenever tank is refilled weekly monthly yearly if faulty if damaged as required