Instruction Manual

GS 461
English
24
Change the fuel pickup body every year
N Drain the fuel tank.
N Pull the fuel pickup body out of the
tank with a hook and disconnect it
from the hose.
N Connect a new fuel pickup body to
the hose.
N Return the fuel pickup body to the
tank.
The four positions of the Master Control
Lever
STOP or 0 – engine off – ignition is
switched off
Run F – engine is running or can start
Warm start n – this position is for
starting the warm engine
Cold start l – this position is for starting
the cold engine
Adjusting the Master Control Lever
The throttle trigger lockout and throttle
trigger must be pressed simultaneously
to adjust the Master Control Lever from
run F to cold start l.
To set the Master Control Lever to warm
start n, first set it to cold start l, then
push the Master Control Lever into the
warm start n position.
Changing to warm start n is only
possible from the cold start l position.
When the throttle trigger is squeezed,
the Master Control Lever returns from
warm start n to run F.
To switch off the engine, set the Master
Control Lever to STOP or 0.
Position cold start l
– If the engine is cold
– If the engine stalls during opening of
throttle after starting
– If the fuel tank has run empty
(engine stalled out)
Position warm start n
– If engine is warm (once the engine
has been running for approx. one
minute)
– When the engine has fired for the
first time
– After ventilation of the combustion
chamber, if the engine was flooded
2411BA019 KN
Starting / Stopping the
Engine
STOP
0
001BA140 KN