User Manual
Table Of Contents
- 1. Table of contents
- 2. Notes on the instruction manual
- 3. Machine overview
- 4. For your safety
- 5. Description of symbols
- 6. Standard equipment
- 7. Preparing the machine for operation
- 8. Notes on working with the machine
- 9. Safety devices
- 10. Operating the machine
- 11. Maintenance
- 11.1 Cleaning the machine
- 11.2 Service intervals
- 11.3 Installing the feed chute
- 11.4 Removing the feed chute
- 11.5 Blade set service intervals
- 11.6 Removing the blade set
- 11.7 Installing the blade set
- 11.8 Wear limits of the blades
- 11.9 Sharpening shredding blades
- 11.10 Electric motor and wheels
- 11.11 Storage and winter break
- 12. Transport
- 13. Minimising wear and preventing damage
- 14. Standard spare parts
- 15. Environmental protection
- 16. Technical specifications
- 17. Troubleshooting
- 18. Service schedule
EN
27
0478 201 8314 C - EN
12.1 Winding up the cable
● Attach cable clip (1) at the edge of
opening (2).
● Store the rest of the electric cable on
the cable clip.
12.2 Pulling or pushing the garden
shredder
● Hold the garden shredder at the upper
chute (1) and tilt to the rear.
● The garden shredder can be pulled or
pushed slowly (walking pace).
12.3 Lifting or carrying the garden
shredder
● 1st person: Hold the garden shredder at
the handles on the upper chute (1).
● 2nd person: Hold the garden shredder
at the strip of the ejection chute
extension (2).
● Lift the garden shredder
simultaneously.
12.4 Transporting the garden shredder
on a load floor
12. Transport
Risk of injury:
Before transporting, carefully read
and observe the section "For your
safety", in particular the
"Transporting the machine" section.
(Ö 4.4)
Only transport the garden shredder
with the chute fitted. Before lifting
the machine, note the weight given
in the "Technical specifications"
section. (Ö 16.)
At least two persons are always
required to lift and carry the
machine.
Wear suitable protective clothing;
the lower arms and upper part of
the body must be fully covered.