User Manual
Table Of Contents
- 1. Table of contents
- 2. Notes on the instruction manual
- 3. Machine overview
- 4. For your safety
- 5. Description of symbols
- 6. Standard equipment
- 7. Preparing the machine for operation
- 8. Notes on working with the machine
- 9. Safety devices
- 10. Operating the machine
- 11. Maintenance
- 11.1 Cleaning the machine
- 11.2 Service intervals
- 11.3 Installing the feed chute
- 11.4 Removing the feed chute
- 11.5 Blade set service intervals
- 11.6 Removing the blade set
- 11.7 Installing the blade set
- 11.8 Wear limits of the blades
- 11.9 Sharpening shredding blades
- 11.10 Electric motor and wheels
- 11.11 Storage and winter break
- 12. Transport
- 13. Minimising wear and preventing damage
- 14. Standard spare parts
- 15. Environmental protection
- 16. Technical specifications
- 17. Troubleshooting
- 18. Service schedule
0478 201 8314 C - EN
24
1 Fit the blade disc
● Fit blade disc (1) onto the blade
mounting. When doing so, pay attention
to the teeth on the blade mounting.
2 Lock the blade set
● Turn blade disc (1) to the position
shown and fold locking device (2)
upwards as far as it goes.
3 Fit the wing blade
● Attach wing blade (4), wing blade (5)
and wing blade (6).
The numbers (3) on the inside of
the wing blades refer to their
installation sequence.