User Manual
Table Of Contents
- 1. Table of contents
- 2. Notes on the instruction manual
- 3. Machine overview
- 4. For your safety
- 5. Description of symbols
- 6. Standard equipment
- 7. Preparing the machine for operation
- 8. Notes on working with the machine
- 9. Safety devices
- 10. Operating the machine
- 11. Maintenance
- 11.1 Cleaning the machine
- 11.2 Service intervals
- 11.3 Installing the feed chute
- 11.4 Removing the feed chute
- 11.5 Blade set service intervals
- 11.6 Removing the blade set
- 11.7 Installing the blade set
- 11.8 Wear limits of the blades
- 11.9 Sharpening shredding blades
- 11.10 Electric motor and wheels
- 11.11 Storage and winter break
- 12. Transport
- 13. Minimising wear and preventing damage
- 14. Standard spare parts
- 15. Environmental protection
- 16. Technical specifications
- 17. Troubleshooting
- 18. Service schedule
0478 201 8314 C - EN
16
Closing the discharge flap:
● For transport or space-saving storage,
lift tab (2) slightly and fold away
discharge flap (1) downwards.
7.4 Attaching the upper chute
● Place upper chute (B) onto lower
chute (1).
● Fold splash guard (2) up as shown and
hold in this position.
● Screw in screws (S).
7.5 Mounting the cable clip
● Press electric cable (1) into the
designated recesses in cable clip (2) as
shown.
8.1 What material can be processed?
Both soft and hard material can be
processed with the garden shredder
GHE 355.
The chute can only be installed by a
specialist dealer using special
tools. STIHL recommends STIHL
specialist dealers.
8. Notes on working with the
machine