User Manual
Table Of Contents
- 1. Table of contents
- 2. Notes on the instruction manual
- 3. Machine overview
- 4. For your safety
- 5. Description of symbols
- 6. Standard equipment
- 7. Preparing the machine for operation
- 8. Notes on working with the machine
- 9. Safety devices
- 10. Operating the machine
- 10.1 Electrical connection of garden shredders
- 10.2 Connecting the power cable
- 10.3 Disconnecting the power cable
- 10.4 Strain relief
- 10.5 Inserting the shredder bag
- 10.6 Removing the shredder bag
- 10.7 Switching on the garden shredder
- 10.8 Switching off the garden shredder
- 10.9 Recommencing operation following a blockage
- 10.10 Shredding
- 10.11 Folding in the machine GHE 140 L
- 10.12 Folding out the machine GHE 140 L
- 11. Maintenance
- 12. Transport
- 13. Minimising wear and preventing damage
- 14. Environmental protection
- 15. Technical specifications
- 16. Troubleshooting
- 17. Service schedule
EN
19
0478 201 8312 A - EN
10.11 Folding in the machine
GHE 140 L
● Disconnect the machine. (Ö 10.3)
● Hold the machine with one hand on
handle (1).
● Pull locking lever (2) to the stop in the
direction of the arrow and hold. The
upper machine is released.
● Slowly guide upper machine (3)
downwards to the stop and hold.
● Release locking lever (2) and ensure
that the upper machine is securely
locked in place.
10.12 Folding out the machine
GHE 140 L
● Hold the machine down with one hand
on handle (1).
● Pull locking lever (2) to the stop in the
direction of the arrow and hold. The
upper machine is released.
● Slowly pull upper machine (3) upwards
to the stop and hold.
● Release locking lever (2) and ensure
that the upper machine is securely
locked in place.
11.1 Adjusting the counterplate
Step 1
● Switch on the machine (on/off switch in
"feed" position). (Ö 10.7)
11. Maintenance
Risk of injury:
Carefully read the section "For your
safety" (Ö 4.), particularly the
subsection "Maintenance and
repairs" (Ö 4.7), and follow all
safety instructions exactly before
performing any maintenance or
cleaning operations on the
machine.
Disconnect the mains plug before
performing any maintenance
operations.
The machine must be free of
shredding material.