User Manual
Table Of Contents
- 1. Table of contents
- 2. Notes on the instruction manual
- 3. Machine overview
- 4. For your safety
- 5. Description of symbols
- 6. Standard equipment
- 7. Preparing the machine for operation
- 8. Notes on working with the machine
- 9. Safety devices
- 10. Operating the machine
- 10.1 Electrical connection of garden shredders
- 10.2 Connecting the power cable
- 10.3 Disconnecting the power cable
- 10.4 Strain relief
- 10.5 Inserting the shredder bag
- 10.6 Removing the shredder bag
- 10.7 Switching on the garden shredder
- 10.8 Switching off the garden shredder
- 10.9 Recommencing operation following a blockage
- 10.10 Shredding
- 10.11 Folding in the machine GHE 140 L
- 10.12 Folding out the machine GHE 140 L
- 11. Maintenance
- 12. Transport
- 13. Minimising wear and preventing damage
- 14. Environmental protection
- 15. Technical specifications
- 16. Troubleshooting
- 17. Service schedule
0478 201 8312 A - EN
14
7.2 Assembling the machine
(GHE 135 L)
● Remove the shredder bag. (Ö 10.6)
● Position upper machine (A) on wheel
carrier (B) and carefully centre. Make
sure that rubber cover (1) is positioned
correctly – rubber cover (1) must not be
clamped between the upper machine
and the black cover on the wheel
carrier. Install upper machine (A) on
wheel carrier (B) by screwing in four
screws (D). Tighten screws (D) to 1-
1,5 Nm.
● Insert the shredder bag. (Ö 10.5)
7.3 Storing the Allen key
● Push Allen key (O) into holder (1) on
the machine.