User Manual

EN
21
0478 201 8315 B - EN
This applies in particular to:
– Inadequately dimensioned power
cables (cross section)
– Incorrect electrical connection (voltage)
– Product modifications not approved by
STIHL
– Use of tools or accessories which are
not approved or suitable for the
machine, or are of inferior quality
– Improper use of the product
– Use of the product for sporting or
competitive events
– Resultant damage due to continued use
of the product with defective
components.
3. Maintenance operations
All operations listed in the section
"Maintenance" must be performed
regularly.
If these maintenance operations cannot be
carried out by the user, a specialist dealer
must be commissioned to perform them.
STIHL recommends that you have
maintenance operations and repairs
performed exclusively by a STIHL
specialist dealer.
STIHL specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– Damage to the motor as a result of
inadequate cleaning of the cooling air
guide (inlet slots, cooling ribs, fan
wheel).
– Corrosive and other resultant damage
caused by incorrect storage.
– Damage to the machine through the
use of inferior-quality spare parts.
– Damage due to untimely or inadequate
maintenance or damage due to
maintenance or repair work not
performed in the workshops of
specialist dealers.
Blade:
6008 702 0121
Wing blade:
6007 702 0300
Blade disc assembly:
6007 700 5190
Shredding material should be
composted and not disposed of
in household waste.
The machine, its packaging and
accessories are all produced
from recyclable materials and must be
disposed of accordingly.
By disposing of materials separately, and
in an environmentally friendly manner,
valuable resources can be re-used. For
this reason, the machine should be
disposed of for recycling at the end of its
useful life.
* Caution!
In the case of mains fuses of less than
15 A, these may be tripped during start-
up or in the case of high load operation
of the machine.
14. Standard spare parts
15. Environmental protection
16. Technical specifications
GHE 105.0
Motor, design Electric motor
Power 2200 W
Amperage rating 10 A
Rated voltage 230 V~
Frequency 50 Hz
Speed 2800 rpm
Main fuse 10 A*
Protection class I
Type of protection Splash proof
(IPX4)
Operating conditions P40
40 s load time
60 s idle time
Tightening torque
bolt for
blade disc
25 Nm
Tightening torque
bolt for
reversible blade
10 Nm
L/W/H 77/48/97 cm
Weight 20 kg
Sound emissions:
In accordance with Directive 2000/14/EC:
Guaranteed sound
power level L
WAd
104 dB(A)
In accordance with Directive 2006/42/EC:
Sound pressure level
at workplace L
pA
93 dB(A)
Uncertainty K
pA
3 dB(A)