User Manual
Table Of Contents
- 1. Table of contents
- 2. Notes on the instruction manual
- 3. Machine overview
- 4. For your safety
- 5. Description of symbols
- 6. Standard equipment
- 7. Preparing the machine for operation
- 8. Notes on working with the machine
- 9. Safety devices
- 10. Operating the machine
- 11. Maintenance
- 12. Transport
- 13. Minimising wear and preventing damage
- 14. Standard spare parts
- 15. Environmental protection
- 16. Technical specifications
- 17. Troubleshooting
- 18. Service schedule
0478 201 8315 B - EN
16
Only electric cables which are no lighter
than rubber sheathed cables H07 RN-F
may be used.
The minimum cross-section of the power
cable must be 3x1.5mm² for a length of
up to 25 m or 3x2.5mm² for a length of
over 25 m.
The plug connections must be splash
proof.
Unsuitable extension cables lead to a loss
of power and may result in damage to the
motor.
Extension cable plugs and connectors
must conform to the standard AS/NZS
3112.
Use a splash-proof coupling box
(protection class IPX4) when using an
extension cable.
This machine is intended for operation with
a power supply having a system
impedance of Z
max
at the transfer point
(house connection) of maximum
0.279 ohms at 50 Hz.
The user must ensure that the machine is
only operated with a power supply which
meets this requirement.
If necessary, this information can be
obtained from the local electric power
company.
10.2 Switching on the garden shredder
● Connect the power cable.
● Press green button (1) on the switch.
Only begin to feed the shredding
material once the motor has reached
the maximum speed (idling speed).
10.3 Switching off the garden shredder
● Press red button (1) on the switch. The
garden shredder motor is switched off
and braked automatically.
10.4 Shredding
● Push the garden shredder onto firm and
level ground and set down safely.
● Put on thick gloves, safety glasses and
hearing protection.
● Open the discharge flap. (Ö 7.4)
● Connect the power cable.
● Start the garden shredder. (Ö 10.2)
● Wait until the garden shredder has
reached its maximum speed (idling
speed).
● Feed the garden shredder with
shredding material in the correct way.
(Ö 8.8)
● Switch off the garden shredder.
(Ö 10.3)
Your electrician can provide further
information on mains connection.
It is only permitted for one person to
feed the garden shredder.
11. Maintenance
Risk of injury:
Carefully read the section "For your
safety" (Ö 4.), particularly the
subsection "Maintenance and
repairs" (Ö 4.7), and follow all
safety instructions exactly before
performing any maintenance or
cleaning operations on the
machine.
Disconnect the mains plug before
performing any maintenance
operations.