User Manual

0478 216 9906 B - EN
68
If these maintenance operations cannot be
carried out by the user, a specialist dealer
must be commissioned to perform them.
STIHL recommends that you have
maintenance operations and repairs
performed exclusively by a STIHL
specialist dealer.
STIHL specialist dealers regularly attend
training courses and are provided with
technical information.
If these operations are neglected, faults
may arise which are the responsibility of
the user.
These include:
– Corrosive and other resultant damage
caused by incorrect storage.
– Damage and resultant damage due to
the use of spare parts which are not
original STIHL parts.
– Damage due to maintenance and repair
operations not performed in the
workshops of authorised specialist
dealers.
Soft material blade disc assembly:
6012 700 5110
Hard material blade disc assembly:
6012 700 5100
Long wing blade:
6012 702 0310
Short wing blade:
6012 702 0300
Blade (x6):
6008 702 0121
Blade (x1):
6012 702 0100
Counter-blade:
6012 702 0500
Shredding material should be
composted and not disposed of
in household waste.
The machine, its packaging and
accessories are all produced
from recyclable materials and must be
disposed of accordingly.
By disposing of materials separately, and
in an environmentally friendly manner,
valuable resources can be re-used. For
this reason, the machine should be
disposed of for recycling at the end of its
useful life.
16.1 Disposal
Render the engine unusable prior to
disposal.
In particular, remove the ignition lead,
empty the fuel tank and drain the engine
oil.
Risk of injury from the blades.
Always store an old garden shredder in a
safe place prior to scrapping. Make sure
that the machine and the blades are kept
out of the reach of children.
17.1 STIHL GH 460.0, GH 460.0 C
Garden Shredder
STIHL Tirol GmbH
Hans Peter Stihl-Strasse 5
6336 Langkampfen
Austria
declares under our sole responsibility that
– design: garden shredder
– manufacturer's brand: STIHL
– type: GH 460.0, GH 460.0 C
– serial number: 6012
complies with the relevant provisions of
Directives 2000/14/EC, 2006/42/EC,
2014/30/EU and 2011/65/EU and has
been developed and manufactured in
accordance with the versions of the
following standards valid on the date of
manufacture: EN 13683 and EN 14982
(where applicable).
Name and address of the notified body
involved:
TÜV Rheinland LGA Products GmbH
Tillystrasse 2
D-90431 Nuremberg
The measured and guaranteed sound
power levels were determined in
accordance with Directive 2000/14/EC,
Appendix V.
GH 460.0
– Measured sound power level:
101.4 dB(A)
– Guaranteed sound power level:
104 dB(A)
15. Standard spare parts
16. Environmental protection
17. EU - Declaration of
conformity