User Manual
Table Of Contents
- 1. Inhaltsverzeichnis
- 2. Zu dieser Gebrauchsanleitung
- 3. Gerätebeschreibung
- 4. Zu Ihrer Sicherheit
- 5. Symbolbeschreibung
- 6. Lieferumfang
- 7. Gerät betriebsbereit machen
- 8. Bedienelemente
- 9. Hinweise zum Arbeiten
- 10. Sicherheitseinrichtungen
- 11. Gerät in Betrieb nehmen
- 12. Wartung
- 12.1 Gerät reinigen
- 12.2 Einfülltrichter ATO 400 demontieren
- 12.3 Messerscheiben demontieren
- 12.4 Messerscheiben montieren
- 12.5 Gegenmesser demontieren
- 12.6 Gegenmesser montieren
- 12.7 Messer wenden
- 12.8 Messer schärfen
- 12.9 Verschleißgrenzen der Messer
- 12.10 Serviceintervall Verbrennungsmotor
- 12.11 Serviceintervalle
- 12.12 Räder
- 12.13 Aufbewahrung und Winterpause
- 13. Transport
- 14. Verschleiß minimieren und Schäden vermeiden
- 15. Übliche Ersatzteile
- 16. Umweltschutz
- 17. EU- Konformitätserklärung
- 18. Technische Daten
- 19. Fehlersuche
- 20. Serviceplan
- 1. Table of contents
- 2. Notes on the instruction manual
- 3. Machine overview
- 4. For your safety
- 5. Description of symbols
- 6. Standard equipment
- 7. Preparing the machine for operation
- 8. Controls
- 9. Notes on working with the machine
- 10. Safety devices
- 11. Operating the machine
- 12. Maintenance
- 12.1 Cleaning the machine
- 12.2 Removing the feed chute ATO 400
- 12.3 Removing the blade discs
- 12.4 Installing the blade discs
- 12.5 Removing the counter-blade
- 12.6 Installing the counter-blade
- 12.7 Reversing the blades
- 12.8 Sharpening the blades
- 12.9 Wear limits of the blades
- 12.10 Service interval of the combustion engine
- 12.11 Service intervals
- 12.12 Wheels
- 12.13 Storage and winter break
- 13. Transport
- 14. Minimising wear and preventing damage
- 15. Standard spare parts
- 16. Environmental protection
- 17. EU - Declaration of conformity
- 18. Technical specifications
- 19. Troubleshooting
- 20. Service schedule
- 1. Sommaire
- 2. À propos de ce manuel d’utilisation
- 3. Description de l’appareil
- 4. Consignes de sécurité
- 5. Signification des pictogrammes
- 6. Contenu de l’emballage
- 7. Préparation de l’appareil
- 8. Éléments de commande
- 9. Conseils d’utilisation
- 10. Dispositifs de sécurité
- 11. Mise en service de l’appareil
- 12. Entretien
- 12.1 Nettoyage de l’appareil
- 12.2 Démontage de l’entonnoir de remplissage ATO 400
- 12.3 Démontage des disques porte-couteaux
- 12.4 Montage des disques porte- couteaux
- 12.5 Démontage du contre- couteau
- 12.6 Montage du contre-couteau
- 12.7 Retournement des couteaux
- 12.8 Affûtage des couteaux
- 12.9 Limites d’usure des couteaux
- 12.10 Intervalle d’entretien du moteur à combustion
- 12.11 Intervalles d’entretien
- 12.12 Roues
- 12.13 Rangement de l’appareil et hivernage
- 13. Transport
- 14. Comment limiter l’usure et éviter les dommages
- 15. Pièces de rechange courantes
- 16. Protection de l’environnement
- 17. Déclaration de conformité UE
- 18. Caractéristiques techniques
- 19. Recherche des pannes
- 20. Feuille d’entretien
- 1. Inhoudsopgave
- 2. Over deze gebruiksaanwijzing
- 3. Beschrijving van het apparaat
- 4. Voor uw veiligheid
- 5. Toelichting van de symbolen
- 6. Leveringsomvang
- 7. Apparaat klaarmaken voor gebruik
- 8. Bedieningselementen
- 9. Aanwijzingen voor werken
- 10. Veiligheidsvoorzieningen
- 11. Apparaat in gebruik nemen
- 12. Onderhoud
- 12.1 Apparaat reinigen
- 12.2 Vultrechter ATO 400 demonteren
- 12.3 Messenschijven demonteren
- 12.4 Messenschijven monteren
- 12.5 Tegenmes demonteren
- 12.6 Tegenmes monteren
- 12.7 Messen draaien
- 12.8 Messen slijpen
- 12.9 Slijtagegrenzen van de messen
- 12.10 Service-interval verbrandingsmotor
- 12.11 Service-intervallen
- 12.12 Wielen
- 12.13 Opslag en winterpauze
- 13. Transport
- 14. Slijtage minimaliseren en schade voorkomen
- 15. Standaard reserveonderdelen
- 16. Milieubescherming
- 17. EU- conformiteitsverklaring
- 18. Technische gegevens
- 19. Defectopsporing
- 20. Onderhoudsschema
- 1. Indice
- 2. Avvertenze sulle istruzioni per l’uso
- 3. Descrizione dell’apparecchio
- 4. Per la vostra sicurezza
- 5. Descrizione dei simboli
- 6. Equipaggiamento fornito
- 7. Preparazione per la messa in servizio dell'apparecchio
- 7.1 Apertura dell'imballaggio del biotrituratore da giardino
- 7.2 Montaggio del telaio
- 7.3 Smontaggio della copertura lame
- 7.4 Montaggio della copertura lame
- 7.5 Montaggio dell'imbuto di caricamento ATO 400
- 7.6 Montaggio del prolungamento canale di scarico
- 7.7 Montaggio delle lamiere
- 7.8 Carburante e olio motore
- 8. Elementi di comando
- 9. Istruzioni di lavoro
- 10. Dispositivi per la sicurezza
- 11. Messa in servizio dell'apparecchio
- 12. Manutenzione
- 12.1 Pulizia dell'apparecchio
- 12.2 Smontaggio dell'imbuto di caricamento ATO 400
- 12.3 Smontaggio dei dischi portalame
- 12.4 Montaggio dei dischi portalame
- 12.5 Smontaggio della controlama
- 12.6 Montaggio della controlama
- 12.7 Inversione delle lame
- 12.8 Affilatura delle lame
- 12.9 Limiti di usura delle lame
- 12.10 Intervallo di manutenzione del motore a combustione
- 12.11 Intervalli di manutenzione
- 12.12 Ruote
- 12.13 Rimessaggio e pausa invernale
- 13. Trasporto
- 14. Minimizzare l’usura ed evitare danni
- 15. Ricambi standard
- 16. Tutela dell’ambiente
- 17. Dichiarazione di conformità EU
- 18. Dati tecnici
- 19. Risoluzione guasti
- 20. Programma Assistenza Tecnica
- 1. Índice
- 2. Acerca de este manual de instrucciones
- 3. Descripción del equipo
- 4. Para su seguridad
- 5. Descripción de los símbolos
- 6. Contenido del suministro
- 7. Preparar el equipo para el servicio
- 8. Elementos de mando
- 9. Indicaciones para el trabajo
- 10. Dispositivos de seguridad
- 11. Poner el equipo en servicio
- 12. Mantenimiento
- 12.1 Limpiar el equipo
- 12.2 Desmontar la tolva de llenado ATO 400
- 12.3 Desmontar los discos de cuchillas
- 12.4 Montar los discos de cuchillas
- 12.5 Desmontar la contracuchilla
- 12.6 Montar la contracuchilla
- 12.7 Dar la vuelta a las cuchillas
- 12.8 Afilar las cuchillas
- 12.9 Límites de desgaste de las cuchillas
- 12.10 Intervalo de servicio del motor de combustión
- 12.11 Intervalos de servicio
- 12.12 Ruedas
- 12.13 Almacenamiento y parada invernal
- 13. Transporte
- 14. Reducir el desgaste y prevenir daños
- 15. Piezas de recambio habituales
- 16. Protección del medio ambiente
- 17. Declaración de conformidad de la UE
- 18. Datos técnicos
- 19. Localización de anomalías
- 20. Plan de mantenimiento
- 1. Índice
- 2. Sobre este manual de utilização
- 3. Descrição do aparelho
- 4. Para sua segurança
- 5. Descrição de símbolos
- 6. Fornecimento
- 7. Preparar o aparelho para o funcionamento
- 8. Elementos de comando
- 9. Instruções para trabalhar
- 10. Dispositivos de segurança
- 11. Colocar o aparelho em funcionamento
- 12. Manutenção
- 12.1 Limpar o aparelho
- 12.2 Desmontar o funil de enchimento ATO 400
- 12.3 Desmontar os discos das lâminas
- 12.4 Montar os discos das lâminas
- 12.5 Desmontar a contra-lâmina
- 12.6 Montar a contra-lâmina
- 12.7 Virar as lâminas
- 12.8 Afiar as lâminas
- 12.9 Limites de desgaste das lâminas
- 12.10 Intervalo de manutenção do motor de combustão
- 12.11 Intervalos de manutenção
- 12.12 Rodas
- 12.13 Arrumação e período de Inverno
- 13. Transporte
- 14. Minimização do desgaste e prevenção de danos
- 15. Peças de reposição comuns
- 16. Proteção do meio ambiente
- 17. Declaração de conformidade UE
- 18. Dados técnicos
- 19. Localização de falhas
- 20. Plano de manutenção
- 1. Innholdsfortegnelse
- 2. Om denne bruksanvisningen
- 3. Maskinbeskrivelse
- 4. For din egen sikkerhet
- 5. Symbolforklaring
- 6. Produktkomponenter
- 7. Gjøre maskinen klar for bruk
- 8. Betjeningselementer
- 9. Informasjon om arbeid
- 10. Sikkerhetsutstyr
- 11. Ta maskinen i bruk
- 12. Vedlikehold
- 12.1 Rengjøre maskinen
- 12.2 Demontere påfyllingstraktenATO 400
- 12.3 Demontere knivskivene
- 12.4 Montere knivskivene
- 12.5 Demontere motkniven
- 12.6 Montere motkniven
- 12.7 Snu knivene
- 12.8 Slipe knivene
- 12.9 Knivenes slitegrenser
- 12.10 Serviceintervall for forbrenningsmotor
- 12.11 Serviceintervaller
- 12.12 Hjul
- 12.13 Oppbevaring og vinterlagring
- 13. Transport
- 14. Minimere slitasjen og unngå skader
- 15. Vanlige reservedeler
- 16. Miljøvern
- 17. EU-samsvarserklæring
- 18. Tekniske data
- 19. Feilsøking
- 20. Serviceplan
- 1. Innehållsförteckning
- 2. Information om denna bruksanvisning
- 3. Maskinbeskrivning
- 4. För din säkerhet
- 5. Symbolbeskrivning
- 6. Leveransens omfattning
- 7. Göra maskinen klar för användning
- 8. Reglage
- 9. Arbetsanvisningar
- 10. Säkerhetsanordningar
- 11. Ta maskinen i bruk
- 12. Underhåll
- 12.1 Göra rent maskinen
- 12.2 Demontera inmatningstratt ATO 400
- 12.3 Demontera knivplattor
- 12.4 Montera knivplattor
- 12.5 Demontera mothållarkniv
- 12.6 Montera mothållarkniv
- 12.7 Vända knivar
- 12.8 Slipa knivar
- 12.9 Slitagegräns knivar
- 12.10 Serviceintervall förbränningsmotor
- 12.11 Serviceintervall
- 12.12 Hjul
- 12.13 Förvaring och vinteruppehåll
- 13. Transport
- 14. Minimera slitage och förhindra skador
- 15. Vanliga reservdelar
- 16. Miljöskydd
- 17. EU- konformitetsdeklaration
- 18. Tekniska data
- 19. Felsökning
- 20. Serviceschema
- 1. Sisällysluettelo
- 2. Tätä käyttöopasta koskevia tietoja
- 3. Laitekuvaus
- 4. Turvallisuutesi vuoksi
- 5. Kuvasymbolien selitykset
- 6. Toimitussisältö
- 7. Laitteen valmistelu käyttöä varten
- 8. Hallintalaitteet
- 9. Työskentelyohjeita
- 10. Turvalaitteet
- 11. Laitteen käyttöönotto
- 12. Huolto
- 12.1 Laitteen puhdistus
- 12.2 Syöttötorven ATO 400 irrotus
- 12.3 Terälautasten irrotus
- 12.4 Terälautasten kiinnitys
- 12.5 Vastaterän irrotus
- 12.6 Vastaterän kiinnitys
- 12.7 Terän kääntäminen
- 12.8 Terien teroitus
- 12.9 Terien kulumisrajat
- 12.10 Polttomoottorin huoltoväli
- 12.11 Huoltovälit
- 12.12 Pyörät
- 12.13 Varastointi ja talvisäilytys
- 13. Kuljetus
- 14. Kulumisen minimointi ja vaurioiden ehkäisy
- 15. Varaosat
- 16. Ympäristönsuojelu
- 17. EU- vaatimustenmukaisuusvaku utus
- 18. Tekniset tiedot
- 19. Vianetsintä
- 20. Huolto-ohjelma
- 1. Indholdsfortegnelse
- 2. Om denne betjeningsvejledning
- 3. Beskrivelse af maskinen
- 4. Sikkerhed
- 5. Symbolforklaring
- 6. Medfølgende dele
- 7. Klargøring af maskinen
- 8. Betjeningsdele
- 9. Arbejdsanvisninger
- 10. Sikkerhedsanordninger
- 11. Tag maskinen i brug
- 12. Vedligeholdelse
- 12.1 Rengør maskinen
- 12.2 Demonter påfyldningstragten ATO 400
- 12.3 Demontering af knivskiver
- 12.4 Montering af knivskiver
- 12.5 Demonter modkniven
- 12.6 Monter modkniven
- 12.7 Vend kniven
- 12.8 Slib kniven
- 12.9 Slidgrænser for knivene
- 12.10 Serviceinterval forbrændingsmotor
- 12.11 Serviceintervaller
- 12.12 Hjul
- 12.13 Opbevaring og vinterpause
- 13. Transport
- 14. Sådan minimerer du slid og undgår skader
- 15. Standardreservedele
- 16. Miljøbeskyttelse
- 17. EC- overensstemmelseserklærin g
- 18. Tekniske data
- 19. Fejlsøgning
- 20. Serviceplan
- 1. Spis treści
- 2. Uwagi dotyczące instrukcji obsługi
- 3. Opis urządzenia
- 4. Zasady bezpiecznej pracy
- 5. Objaśnienie symboli
- 6. Wyposażenie standardowe
- 7. Przygotowanie urządzenia do pracy
- 8. Elementy obsługi
- 9. Wskazówki dotyczące wykonywania pracy
- 10. Urządzenia zabezpieczające
- 11. Uruchamianie urządzenia
- 12. Konserwacja
- 12.1 Czyszczenie urządzenia
- 12.2 Zdemontowanie leja wsadowego ATO 400
- 12.3 Zdemontowanie tarcz noży
- 12.4 Zamontowanie tarcz noży
- 12.5 Zdemontowanie noża przeciwbieżnego
- 12.6 Zamontowanie noża przeciwbieżnego
- 12.7 Odwracanie noży
- 12.8 Ostrzenie noży
- 12.9 Granica zużycia noży
- 12.10 Okres międzyobsługowy silnika spalinowego
- 12.11 Okresy międzyobsługowe
- 12.12 Koła
- 12.13 Przechowywanie i przerwa zimowa
- 13. Transport
- 14. Ograniczanie zużycia i zapobieganie uszkodzeniom
- 15. Typowe części zamienne
- 16. Ochrona środowiska
- 17. Deklaracja zgodności UE
- 18. Dane techniczne
- 19. Wykrywanie usterek
- 20. Plan czynności serwisowych
- 1. Obsah
- 2. O tomto návode na obsluhu
- 3. Popis stroja
- 4. Pre vašu bezpečnosť
- 5. Popis symbolov
- 6. Rozsah dodávky
- 7. Príprava stroja na prevádzku
- 8. Ovládacie prvky
- 9. Pokyny pre prácu
- 10. Bezpečnostné zariadenia
- 11. Uvedenie stroja do prevádzky
- 12. Údržba
- 12.1 Čistenie stroja
- 12.2 Demontáž podávacieho lievika ATO 400
- 12.3 Demontáž nožových kotúčov
- 12.4 Montáž nožových kotúčov
- 12.5 Demontáž protinoža
- 12.6 Montáž protinoža
- 12.7 Otočenie nožov
- 12.8 Ostrenie nožov
- 12.9 Hranice opotrebovania nožov
- 12.10 Servisný interval spaľovacieho motora
- 12.11 Servisné intervaly
- 12.12 Kolesá
- 12.13 Uskladnenie stroja a zimná prestávka
- 13. Preprava stroja
- 14. Opatrenia na minimalizovanie opotrebovania a na zabránenie vzniku škôd
- 15. Bežné náhradné diely
- 16. Ochrana životného prostredia
- 17. Prehlásenie o zhode výrobcom - EÚ
- 18. Technické údaje
- 19. Hľadanie porúch
- 20. Servisný plán
0478 216 9906 B - EN
52
4.6 Working with your machine
Never work when animals or
persons, particularly children,
are in the danger area.
Do not operate the machine in the rain or
during thunder storms, particularly when
there is a risk of lightning strike.
The risk of accidents is higher if the ground
is damp due to increased danger of
slipping.
Particular caution should be exercised
during working in order to prevent slipping.
If possible, avoid using the machine when
the ground is damp.
Only work during the day or with good
artificial light.
Keep the working area neat and tidy at all
times. Remove tripping hazards such as
stones, branches, cables etc.
The operator should not stand any higher
than the level of the base of the machine.
Exhaust gases:
The machine generates
poisonous exhaust gases when
the engine is running. The
gases contain poisonous
carbon monoxide, a colourless and
odourless gas, as well as other pollutants.
The engine must never be operated in
closed or poorly ventilated spaces.
The machine must be positioned so that it
is not necessary to work facing the
direction of the exhaust gases.
Starting:
Place the machine in a stable and upright
position prior to starting. The machine
must never be operated in a horizontal
position.
Exercise care when starting the machine
and observe the instructions contained in
the section entitled "Operating the
machine" (Ö 11.). Starting the machine in
accordance with these instructions
reduces the risk of injury.
Risk of injury!
If the starter rope recoils at speed, the
hand and arm will be pulled towards the
engine faster than the starter rope can be
released. This kickback can result in
broken bones, crush injuries and sprains.
Do not stand in front of the discharge
opening when starting the engine or
switching on the motor. There must be no
shredding material in the garden shredder
when it is started or switched on.
Shredding material may be ejected and
lead to injuries.
The machine must not be tilted during
start-up.
Do not pull the recoil starter rope if the
machine is not properly closed and the
blades are exposed.
Risk of injury due to rotating blades!
Working:
When the machine is running, never put
your face or any other part of your body
above the feed chute or in front of the
ejection opening. Always keep your head
and body away from the feed openings.
Never put your hands or any
other part of your body or
clothing into the feed chute or
ejection chute. There is a
considerable risk of injury to eyes, face,
fingers, hands etc.
Always maintain your balance and firm
footing. Do not stretch forward.
The splash guard must not be tampered
with (removed, folded up, jammed into
position, damaged etc.) during operation.
The operator must stand in the working
area described when feeding the
shredder. Stay inside the working area and
outside of the ejection zone at all times
during operation of the machine. (Ö 9.4)
Risk of injury:
Shredding material may be ejected back
up during operation. Always wear safety
glasses and keep your face away from the
feed openings.
Never tilt the machine when the engine or
motor is running.
If the machine falls over during operation,
immediately switch off the engine and
detach the spark plug socket.
Make sure that there is no shredding
material blocking the ejection chute, as
this could result in a poor shredding
performance or kickbacks.
When feeding the garden shredder, pay
particular attention to ensuring that no
foreign objects such as bits of metal,
stones, plastic, glass, etc. get into the
Danger to life through poisoning!
In the case of nausea, headache,
impaired vision (e.g. decreasing
field of view) hearing disorder,
dizziness, decreasing power of
concentration, stop working
immediately. These symptoms may
be caused by excessively high
exhaust gas concentrations.
Risk of injury!
Never place your hands or feet
above, underneath or on rotating
parts.