User Manual
Table Of Contents
- 1. Inhaltsverzeichnis
- 2. Zu dieser Gebrauchsanleitung
- 3. Gerätebeschreibung
- 4. Zu Ihrer Sicherheit
- 5. Symbolbeschreibung
- 6. Lieferumfang
- 7. Gerät betriebsbereit machen
- 8. Bedienelemente
- 9. Hinweise zum Arbeiten
- 10. Sicherheitseinrichtungen
- 11. Gerät in Betrieb nehmen
- 12. Wartung
- 12.1 Gerät reinigen
- 12.2 Einfülltrichter ATO 400 demontieren
- 12.3 Messerscheiben demontieren
- 12.4 Messerscheiben montieren
- 12.5 Gegenmesser demontieren
- 12.6 Gegenmesser montieren
- 12.7 Messer wenden
- 12.8 Messer schärfen
- 12.9 Verschleißgrenzen der Messer
- 12.10 Serviceintervall Verbrennungsmotor
- 12.11 Serviceintervalle
- 12.12 Räder
- 12.13 Aufbewahrung und Winterpause
- 13. Transport
- 14. Verschleiß minimieren und Schäden vermeiden
- 15. Übliche Ersatzteile
- 16. Umweltschutz
- 17. EU- Konformitätserklärung
- 18. Technische Daten
- 19. Fehlersuche
- 20. Serviceplan
- 1. Table of contents
- 2. Notes on the instruction manual
- 3. Machine overview
- 4. For your safety
- 5. Description of symbols
- 6. Standard equipment
- 7. Preparing the machine for operation
- 8. Controls
- 9. Notes on working with the machine
- 10. Safety devices
- 11. Operating the machine
- 12. Maintenance
- 12.1 Cleaning the machine
- 12.2 Removing the feed chute ATO 400
- 12.3 Removing the blade discs
- 12.4 Installing the blade discs
- 12.5 Removing the counter-blade
- 12.6 Installing the counter-blade
- 12.7 Reversing the blades
- 12.8 Sharpening the blades
- 12.9 Wear limits of the blades
- 12.10 Service interval of the combustion engine
- 12.11 Service intervals
- 12.12 Wheels
- 12.13 Storage and winter break
- 13. Transport
- 14. Minimising wear and preventing damage
- 15. Standard spare parts
- 16. Environmental protection
- 17. EU - Declaration of conformity
- 18. Technical specifications
- 19. Troubleshooting
- 20. Service schedule
- 1. Sommaire
- 2. À propos de ce manuel d’utilisation
- 3. Description de l’appareil
- 4. Consignes de sécurité
- 5. Signification des pictogrammes
- 6. Contenu de l’emballage
- 7. Préparation de l’appareil
- 8. Éléments de commande
- 9. Conseils d’utilisation
- 10. Dispositifs de sécurité
- 11. Mise en service de l’appareil
- 12. Entretien
- 12.1 Nettoyage de l’appareil
- 12.2 Démontage de l’entonnoir de remplissage ATO 400
- 12.3 Démontage des disques porte-couteaux
- 12.4 Montage des disques porte- couteaux
- 12.5 Démontage du contre- couteau
- 12.6 Montage du contre-couteau
- 12.7 Retournement des couteaux
- 12.8 Affûtage des couteaux
- 12.9 Limites d’usure des couteaux
- 12.10 Intervalle d’entretien du moteur à combustion
- 12.11 Intervalles d’entretien
- 12.12 Roues
- 12.13 Rangement de l’appareil et hivernage
- 13. Transport
- 14. Comment limiter l’usure et éviter les dommages
- 15. Pièces de rechange courantes
- 16. Protection de l’environnement
- 17. Déclaration de conformité UE
- 18. Caractéristiques techniques
- 19. Recherche des pannes
- 20. Feuille d’entretien
- 1. Inhoudsopgave
- 2. Over deze gebruiksaanwijzing
- 3. Beschrijving van het apparaat
- 4. Voor uw veiligheid
- 5. Toelichting van de symbolen
- 6. Leveringsomvang
- 7. Apparaat klaarmaken voor gebruik
- 8. Bedieningselementen
- 9. Aanwijzingen voor werken
- 10. Veiligheidsvoorzieningen
- 11. Apparaat in gebruik nemen
- 12. Onderhoud
- 12.1 Apparaat reinigen
- 12.2 Vultrechter ATO 400 demonteren
- 12.3 Messenschijven demonteren
- 12.4 Messenschijven monteren
- 12.5 Tegenmes demonteren
- 12.6 Tegenmes monteren
- 12.7 Messen draaien
- 12.8 Messen slijpen
- 12.9 Slijtagegrenzen van de messen
- 12.10 Service-interval verbrandingsmotor
- 12.11 Service-intervallen
- 12.12 Wielen
- 12.13 Opslag en winterpauze
- 13. Transport
- 14. Slijtage minimaliseren en schade voorkomen
- 15. Standaard reserveonderdelen
- 16. Milieubescherming
- 17. EU- conformiteitsverklaring
- 18. Technische gegevens
- 19. Defectopsporing
- 20. Onderhoudsschema
- 1. Indice
- 2. Avvertenze sulle istruzioni per l’uso
- 3. Descrizione dell’apparecchio
- 4. Per la vostra sicurezza
- 5. Descrizione dei simboli
- 6. Equipaggiamento fornito
- 7. Preparazione per la messa in servizio dell'apparecchio
- 7.1 Apertura dell'imballaggio del biotrituratore da giardino
- 7.2 Montaggio del telaio
- 7.3 Smontaggio della copertura lame
- 7.4 Montaggio della copertura lame
- 7.5 Montaggio dell'imbuto di caricamento ATO 400
- 7.6 Montaggio del prolungamento canale di scarico
- 7.7 Montaggio delle lamiere
- 7.8 Carburante e olio motore
- 8. Elementi di comando
- 9. Istruzioni di lavoro
- 10. Dispositivi per la sicurezza
- 11. Messa in servizio dell'apparecchio
- 12. Manutenzione
- 12.1 Pulizia dell'apparecchio
- 12.2 Smontaggio dell'imbuto di caricamento ATO 400
- 12.3 Smontaggio dei dischi portalame
- 12.4 Montaggio dei dischi portalame
- 12.5 Smontaggio della controlama
- 12.6 Montaggio della controlama
- 12.7 Inversione delle lame
- 12.8 Affilatura delle lame
- 12.9 Limiti di usura delle lame
- 12.10 Intervallo di manutenzione del motore a combustione
- 12.11 Intervalli di manutenzione
- 12.12 Ruote
- 12.13 Rimessaggio e pausa invernale
- 13. Trasporto
- 14. Minimizzare l’usura ed evitare danni
- 15. Ricambi standard
- 16. Tutela dell’ambiente
- 17. Dichiarazione di conformità EU
- 18. Dati tecnici
- 19. Risoluzione guasti
- 20. Programma Assistenza Tecnica
- 1. Índice
- 2. Acerca de este manual de instrucciones
- 3. Descripción del equipo
- 4. Para su seguridad
- 5. Descripción de los símbolos
- 6. Contenido del suministro
- 7. Preparar el equipo para el servicio
- 8. Elementos de mando
- 9. Indicaciones para el trabajo
- 10. Dispositivos de seguridad
- 11. Poner el equipo en servicio
- 12. Mantenimiento
- 12.1 Limpiar el equipo
- 12.2 Desmontar la tolva de llenado ATO 400
- 12.3 Desmontar los discos de cuchillas
- 12.4 Montar los discos de cuchillas
- 12.5 Desmontar la contracuchilla
- 12.6 Montar la contracuchilla
- 12.7 Dar la vuelta a las cuchillas
- 12.8 Afilar las cuchillas
- 12.9 Límites de desgaste de las cuchillas
- 12.10 Intervalo de servicio del motor de combustión
- 12.11 Intervalos de servicio
- 12.12 Ruedas
- 12.13 Almacenamiento y parada invernal
- 13. Transporte
- 14. Reducir el desgaste y prevenir daños
- 15. Piezas de recambio habituales
- 16. Protección del medio ambiente
- 17. Declaración de conformidad de la UE
- 18. Datos técnicos
- 19. Localización de anomalías
- 20. Plan de mantenimiento
- 1. Índice
- 2. Sobre este manual de utilização
- 3. Descrição do aparelho
- 4. Para sua segurança
- 5. Descrição de símbolos
- 6. Fornecimento
- 7. Preparar o aparelho para o funcionamento
- 8. Elementos de comando
- 9. Instruções para trabalhar
- 10. Dispositivos de segurança
- 11. Colocar o aparelho em funcionamento
- 12. Manutenção
- 12.1 Limpar o aparelho
- 12.2 Desmontar o funil de enchimento ATO 400
- 12.3 Desmontar os discos das lâminas
- 12.4 Montar os discos das lâminas
- 12.5 Desmontar a contra-lâmina
- 12.6 Montar a contra-lâmina
- 12.7 Virar as lâminas
- 12.8 Afiar as lâminas
- 12.9 Limites de desgaste das lâminas
- 12.10 Intervalo de manutenção do motor de combustão
- 12.11 Intervalos de manutenção
- 12.12 Rodas
- 12.13 Arrumação e período de Inverno
- 13. Transporte
- 14. Minimização do desgaste e prevenção de danos
- 15. Peças de reposição comuns
- 16. Proteção do meio ambiente
- 17. Declaração de conformidade UE
- 18. Dados técnicos
- 19. Localização de falhas
- 20. Plano de manutenção
- 1. Innholdsfortegnelse
- 2. Om denne bruksanvisningen
- 3. Maskinbeskrivelse
- 4. For din egen sikkerhet
- 5. Symbolforklaring
- 6. Produktkomponenter
- 7. Gjøre maskinen klar for bruk
- 8. Betjeningselementer
- 9. Informasjon om arbeid
- 10. Sikkerhetsutstyr
- 11. Ta maskinen i bruk
- 12. Vedlikehold
- 12.1 Rengjøre maskinen
- 12.2 Demontere påfyllingstraktenATO 400
- 12.3 Demontere knivskivene
- 12.4 Montere knivskivene
- 12.5 Demontere motkniven
- 12.6 Montere motkniven
- 12.7 Snu knivene
- 12.8 Slipe knivene
- 12.9 Knivenes slitegrenser
- 12.10 Serviceintervall for forbrenningsmotor
- 12.11 Serviceintervaller
- 12.12 Hjul
- 12.13 Oppbevaring og vinterlagring
- 13. Transport
- 14. Minimere slitasjen og unngå skader
- 15. Vanlige reservedeler
- 16. Miljøvern
- 17. EU-samsvarserklæring
- 18. Tekniske data
- 19. Feilsøking
- 20. Serviceplan
- 1. Innehållsförteckning
- 2. Information om denna bruksanvisning
- 3. Maskinbeskrivning
- 4. För din säkerhet
- 5. Symbolbeskrivning
- 6. Leveransens omfattning
- 7. Göra maskinen klar för användning
- 8. Reglage
- 9. Arbetsanvisningar
- 10. Säkerhetsanordningar
- 11. Ta maskinen i bruk
- 12. Underhåll
- 12.1 Göra rent maskinen
- 12.2 Demontera inmatningstratt ATO 400
- 12.3 Demontera knivplattor
- 12.4 Montera knivplattor
- 12.5 Demontera mothållarkniv
- 12.6 Montera mothållarkniv
- 12.7 Vända knivar
- 12.8 Slipa knivar
- 12.9 Slitagegräns knivar
- 12.10 Serviceintervall förbränningsmotor
- 12.11 Serviceintervall
- 12.12 Hjul
- 12.13 Förvaring och vinteruppehåll
- 13. Transport
- 14. Minimera slitage och förhindra skador
- 15. Vanliga reservdelar
- 16. Miljöskydd
- 17. EU- konformitetsdeklaration
- 18. Tekniska data
- 19. Felsökning
- 20. Serviceschema
- 1. Sisällysluettelo
- 2. Tätä käyttöopasta koskevia tietoja
- 3. Laitekuvaus
- 4. Turvallisuutesi vuoksi
- 5. Kuvasymbolien selitykset
- 6. Toimitussisältö
- 7. Laitteen valmistelu käyttöä varten
- 8. Hallintalaitteet
- 9. Työskentelyohjeita
- 10. Turvalaitteet
- 11. Laitteen käyttöönotto
- 12. Huolto
- 12.1 Laitteen puhdistus
- 12.2 Syöttötorven ATO 400 irrotus
- 12.3 Terälautasten irrotus
- 12.4 Terälautasten kiinnitys
- 12.5 Vastaterän irrotus
- 12.6 Vastaterän kiinnitys
- 12.7 Terän kääntäminen
- 12.8 Terien teroitus
- 12.9 Terien kulumisrajat
- 12.10 Polttomoottorin huoltoväli
- 12.11 Huoltovälit
- 12.12 Pyörät
- 12.13 Varastointi ja talvisäilytys
- 13. Kuljetus
- 14. Kulumisen minimointi ja vaurioiden ehkäisy
- 15. Varaosat
- 16. Ympäristönsuojelu
- 17. EU- vaatimustenmukaisuusvaku utus
- 18. Tekniset tiedot
- 19. Vianetsintä
- 20. Huolto-ohjelma
- 1. Indholdsfortegnelse
- 2. Om denne betjeningsvejledning
- 3. Beskrivelse af maskinen
- 4. Sikkerhed
- 5. Symbolforklaring
- 6. Medfølgende dele
- 7. Klargøring af maskinen
- 8. Betjeningsdele
- 9. Arbejdsanvisninger
- 10. Sikkerhedsanordninger
- 11. Tag maskinen i brug
- 12. Vedligeholdelse
- 12.1 Rengør maskinen
- 12.2 Demonter påfyldningstragten ATO 400
- 12.3 Demontering af knivskiver
- 12.4 Montering af knivskiver
- 12.5 Demonter modkniven
- 12.6 Monter modkniven
- 12.7 Vend kniven
- 12.8 Slib kniven
- 12.9 Slidgrænser for knivene
- 12.10 Serviceinterval forbrændingsmotor
- 12.11 Serviceintervaller
- 12.12 Hjul
- 12.13 Opbevaring og vinterpause
- 13. Transport
- 14. Sådan minimerer du slid og undgår skader
- 15. Standardreservedele
- 16. Miljøbeskyttelse
- 17. EC- overensstemmelseserklærin g
- 18. Tekniske data
- 19. Fejlsøgning
- 20. Serviceplan
- 1. Spis treści
- 2. Uwagi dotyczące instrukcji obsługi
- 3. Opis urządzenia
- 4. Zasady bezpiecznej pracy
- 5. Objaśnienie symboli
- 6. Wyposażenie standardowe
- 7. Przygotowanie urządzenia do pracy
- 8. Elementy obsługi
- 9. Wskazówki dotyczące wykonywania pracy
- 10. Urządzenia zabezpieczające
- 11. Uruchamianie urządzenia
- 12. Konserwacja
- 12.1 Czyszczenie urządzenia
- 12.2 Zdemontowanie leja wsadowego ATO 400
- 12.3 Zdemontowanie tarcz noży
- 12.4 Zamontowanie tarcz noży
- 12.5 Zdemontowanie noża przeciwbieżnego
- 12.6 Zamontowanie noża przeciwbieżnego
- 12.7 Odwracanie noży
- 12.8 Ostrzenie noży
- 12.9 Granica zużycia noży
- 12.10 Okres międzyobsługowy silnika spalinowego
- 12.11 Okresy międzyobsługowe
- 12.12 Koła
- 12.13 Przechowywanie i przerwa zimowa
- 13. Transport
- 14. Ograniczanie zużycia i zapobieganie uszkodzeniom
- 15. Typowe części zamienne
- 16. Ochrona środowiska
- 17. Deklaracja zgodności UE
- 18. Dane techniczne
- 19. Wykrywanie usterek
- 20. Plan czynności serwisowych
- 1. Obsah
- 2. O tomto návode na obsluhu
- 3. Popis stroja
- 4. Pre vašu bezpečnosť
- 5. Popis symbolov
- 6. Rozsah dodávky
- 7. Príprava stroja na prevádzku
- 8. Ovládacie prvky
- 9. Pokyny pre prácu
- 10. Bezpečnostné zariadenia
- 11. Uvedenie stroja do prevádzky
- 12. Údržba
- 12.1 Čistenie stroja
- 12.2 Demontáž podávacieho lievika ATO 400
- 12.3 Demontáž nožových kotúčov
- 12.4 Montáž nožových kotúčov
- 12.5 Demontáž protinoža
- 12.6 Montáž protinoža
- 12.7 Otočenie nožov
- 12.8 Ostrenie nožov
- 12.9 Hranice opotrebovania nožov
- 12.10 Servisný interval spaľovacieho motora
- 12.11 Servisné intervaly
- 12.12 Kolesá
- 12.13 Uskladnenie stroja a zimná prestávka
- 13. Preprava stroja
- 14. Opatrenia na minimalizovanie opotrebovania a na zabránenie vzniku škôd
- 15. Bežné náhradné diely
- 16. Ochrana životného prostredia
- 17. Prehlásenie o zhode výrobcom - EÚ
- 18. Technické údaje
- 19. Hľadanie porúch
- 20. Servisný plán
49
DEFRNLITESPTNOSVFIDAPLSK EN
0478 216 9906 B - EN
4.1 General
These safety regulations must
be observed when working with
the machine.
Read the entire instruction
manual before using the
machine for the first time. Keep
the instruction manual in a safe
place for future reference.
Observe the operating and maintenance
instructions contained in the separate
engine instruction manual.
These safety precautions are essential for
your safety, however the list is not
exhaustive. Always use the machine in a
reasonable and responsible manner and
be aware that the user is responsible for
accidents involving third parties or their
property.
Make sure that you are familiar with the
controls and use of the machine.
The machine must only be used by
persons who have read the instruction
manual and are familiar with operation of
the machine. The user should seek expert
and practical instruction prior to initial
operation. The user must receive
instruction on safe use of the machine
from the vendor or another expert.
During this instruction, the user should be
made aware that the utmost care and
concentration are required for working with
the machine.
Residual risks persist even if you operate
this machine according to the instructions.
Make sure that the user is physically,
sensorily and mentally capable of
operating the machine and working with it.
If the user is physically, sensorily or
mentally impaired, the machine must only
be used under supervision or following
instruction by a responsible person.
Make sure that the user is of legal age or
being trained under supervision in a
profession in accordance with national
regulations.
Only give or lend the machine, including
any accessories, to persons who are
familiar with this model and how to operate
it. The instruction manual forms part of the
machine and must always be provided to
persons borrowing it.
The machine must only be operated by
persons who are well rested and in good
physical and mental condition. If your
health is impaired, you should consult your
doctor to determine whether working with
the machine is possible. The machine
should not be operated after the
consumption of alcohol, drugs or
medications which impair reactions.
Caution – risk of accident!
STIHL garden shredders are suitable for
shredding branch material and plant
trimmings. Their use for other purposes is
not permitted and may be dangerous or
result in damage to the machine.
The garden shredder must not be used
(incomplete list):
– for any other materials (e.g. glass,
metal).
– for tasks other than those described in
this instruction manual.
– for the preparation of foodstuffs
(e.g. crushing ice, mashing pulp).
For safety reasons, any modification to the
machine, except the proper installation of
accessories approved by STIHL, is
forbidden and results in voiding of the
warranty cover. Information regarding
approved accessories can be obtained
from your STIHL specialist dealer.
In particular, any tampering with the
machine which increases the power output
or speed of the engine or motor is
forbidden.
It is not permitted to transport objects,
animals or persons, particularly children,
on the machine.
3. Machine overview
1 Feed chute ATO 400
2 Engine
3 On/Off switch
4 Spark plug socket
5 Wheel carrier
6 Ejection chute
7 Wheel
8 Branch guide
9 Transport handle
10 Rating plate with machine number
11 Tool box
12 Branch guide lock
4. For your safety
1
Risk of death from suffocation!
Packaging material is not a toy -
danger of suffocation! Keep
packaging material away from
children.