Instruction Manual

67
AO
Cleaning and Maintenance
Wash and clean the visor after use. Take care not to scratch the visor. Clean with a mild detergent
(soap). The detergent used must not irritate the skin. Dry with a soft cloth. Do not use hard cloths
as they could scratch the visor. Regular maintenance and cleaning ensure a high level of wearing
comfort. Incorrect cleaning and care can impair the protective function of the face shield. Clean
and care for this product exactly as instructed.
Transport and Storage
Suitable packaging protects the face shield during transport. The face shield should preferably be
stored in its original packaging in a well ventilated, dry room. Do not expose it to extreme
temperatures, liquids or UV radiation.
Service life
It is not easy to predict the service life of a visor. In outdoor use we recommend replacing the visor
at least every two years. In demanding conditions it may be necessary to replace the visor more
frequently. A visor which is damaged, scratched or has been exposed to impacts must be replaced
immediately. Always use original STIHL parts.
Australian / New Zealand Standard
AS/NZS 1337.2-2012: Mesh visor standard
AS/NZS 1337.1-2010: PC visor standard
Marking in visor
STIHL: Manufacturer
AS/NZS 1337.2-2012: Mesh visor standard
AS/NZS 1337.1-2010: PC visor standard
S: Symbol of mechanical strength (low impact), Mesh visor
F: Symbol of mechanical strength (medium impact), PC visor
Accessories and markings, A
Further information is available from any STIHL servicing dealer.
Material Approved Markings
0000 889 9028 Nylon mesh AS/NZS 1337.2-2012 STIHL S
0000 889 9025 Polycarbonate 1 mm AS/NZS 1337.1-2010 STIHL F
0000 889 9042 Safe 2 AS/NZS 1337.2-2012 STIHL S
0000 884 0478 Safe 1 S2H, Dynamic BT AS/NZS 1337.2-2012
AS/NZS 1337.1-2010
STIHL S, STIHL F
0456_703_0003_0_06_200211_99.book Seite 67 Freitag, 14. Februar 2020 7:22 07