Instruction Manual

FSE 60, FSE 71, FSE 81
English
42
Winding line onto spool
N Use green-coded nylon line with a
diameter of 2 mm (0.08 in).
N Cut two 2 m (6ft 6in) lengths of
nylon line from the reel (special
accessory).
N Rotate the spool (2)
counterclockwise until the two arrow
points are in alignment.
N Push the straight end of each line
through one of the sleeves (5) in the
mowing head (3) until you feel a
noticeable resistance – and then
continue pushing as far as stop.
N Hold the mowing head steady.
N Rotate the spool counterclockwise
until the shortest line is about 10 cm
(4 in).
N If necessary, cut the longer line to a
length of about 10 cm (4 in).
The mowing head is now full.
Schnur/LINE 2
681BA023 KN
5
Schnur/LINE 1
3
3
2
681BA024 KN
Schnur/LINE 2
Schnur/LINE 1