Instruction Manual

FSE 60, FSE 71, FSE 81
English
35
N Push the deflector (1) over the
clamp (2) as far as stop.
N Fit the locknut (3) in the hex recess
on the deflector.
N Make sure the holes line up.
N Insert the M6x30 screw (4) and
tighten it down firmly.
Placing Power Tool on the Ground
N Switch off the power tool.
N Lay your trimmer on its back with
the loop handle facing down and the
output shaft facing up.
Fitting Mowing Head without Screw
Mounting
Keep the instruction leaflet for the
mowing head in a safe place.
STIHL AutoCut C 5-2
N Slip the mowing head (2) on to the
shaft – as AutoCut 5-2.
N Turn the spool (9) clockwise until
the two arrow heads line up –
secure the spool in this position.
N Insert the cap (8) in the spool, press
it down as far as stop and turn it
clockwise at the same time.
N Turn the cap until you feel
resistance and then tighten it down
firmly by hand.
Mounting the Deflector
1
238BA003 KN
2
238BA004 KN
4
3
Mounting the Cutting
Attachment
238BA021 KN
9
681BA018 KN
Schnur/LINE 2
Schnur/LINE 1
2
8