Instruction Manual

0458-777-9821-B
36
English 8 Connecting to Power Supply
8.1 Connecting Trimmer to Power Supply
► Insert the plug (1) into the extension cable coupling (2).
The strain relief (cable retainer) protects the connecting
cable from damage.
► Make a loop in the extension cable.
► Pass the loop (3) through the opening (4).
► Slip the loop (3) over the hook (5) and pull it tight.
► Insert the extension cable’s plug in a properly installed
wall outlet.
9.1 Switching On
► Hold the trimmer firmly with one hand on the control
handle – wrap your thumb around the handle.
► Hold the trimmer firmly with the other hand on the loop
handle – wrap your thumb around the handle.
► Depress the trigger lockout (1) with your hand and hold it
there.
► Pull the trigger (2) with your index finger and hold it there.
The motor accelerates and the cutting attachment rotates.
9.2 Switching Off
► Release the trigger and trigger lockout lever.
► Wait for the cutting attachment to come to a standstill.
► If the cutting attachment continues to rotate: Stop work,
disconnect extension cable’s coupling from trimmer’s plug
and contact your STIHL servicing dealer for assistance.
The trimmer has a malfunction.
8 Connecting to Power Supply
12
3
0000-GXX-9911-A0
3
5
4
0000-GXX-9912-A0
9 Switching the Trimmer On/Off
1
2
0000-GXX-9913-A0