Instruction Manual

FSB-KM
English
14
Starting the Engine
Always follow the operating instructions
for the KombiEngine and basic power
tool.
N Place the machine on the ground –
it must rest securely on the machine
support and the gearbox.
To reduce the risk of accidents, check
that the cutting attachment is not
touching the ground of any other
obstacles.
N Make sure you have a firm footing,
either standing, stooping or
kneeling.
N Hold the machine with you left hand
and press it down firmly – do not
touch the controls on the control
handle – see KombiEngine or basic
power tool instruction manual.
NOTICE
Do not stand or kneel on the drive tube.
WARNING
The cutting attachment may begin to
move as soon as the engine starts. For
this reason, blip the throttle after starting
– the engine returns to idling speed.
The starting procedure is now as
described in the instruction manual of
the KombiEngine or basic power tool
you are using.
Stopping the Engine
N See KombiEngine or basic power
tool instruction manual.
For periods of 3 months or longer
N Remove, clean and inspect the
cutting attachment.
N If the KombiTool is removed from
the KombiEngine and stored
separately: Fit the protective cap on
the drive tube to avoid dirt getting
into the coupling.
N Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons.
Starting / Stopping the
Engine
355BA007 KN
Storing the Machine