Manualshelf

Instruction Manual

ManualsBrandsStihl ManualsGrass TrimmerFSB-KM
11121314151617181920
FSB-KM
English
12
N Turn the mowing head (1) clockwise
until it engages the shaft (2)
N Block the shaft, see "Blocking the
shaft”
N Tighten the mowing head (1)
NOTICE
Remove the tool again used to block the
shaft.
Removing the mowing head
N Block the shaft, see "Blocking the
shaft"
N Turn the mowing head
counterclockwise
STIHL PolyCut 6-3
N Push thrust plate onto the shaft
N Insert the nut (10) into the mowing
head
N Turn the mowing head (11)
clockwise until it engages the shaft
(5)
N Block the shaft
N Tighten the mowing head
WARNING
Nuts that move too easily must be
replaced.
NOTICE
Remove the tool again used to block the
shaft.
Removing the mowing head
N Block the shaft, see "Blocking the
shaft”
N Turn the mowing head
counterclockwise
0000-GXX-3940-A0
2
1