Instruction Manual

FSB-KM
English
9
N Push the lug (1) on the drive tube
into the slot (2) in the coupling
sleeve as far as stop.
When correctly installed, the red line (3)
(arrow point) must be flush with the end
of the coupling sleeve.
N Tighten down the star knob (4)
firmly.
Removing the KombiTool
N Reverse the above sequence to
remove the drive tube.
Fitting the line limiter blade
N Slide the blade (1) into the
deflector's guide.
N Insert and tighten down the
screw (2) with the combination
wrench (3) – supplied with
KombiEngine or available as
special accessory.
Mounting the deflector
N Push the clamp (1) over the lug (2)
on the deflector and hold it there.
N Push the other side of the clamp (1)
over the deflector.
Mounting the KombiTool
1
002BA326 KN
2
3
002BA327 KN
4
Mounting the Deflector
2
002BA250 KN
1
3
002BA251 KN
1
2