Instruction Manual

Table Of Contents
If a metal cutting attachment is mounted: Fit
the matching transport guard.
Carrying the brushcutter
Carry the brushcutter in one hand properly
balanced by the shaft, with the cutting attach‐
ment behind you.
Transporting the brushcutter in the car
Secure the brushcutter to prevent turnover
and movement.
14.2 Transporting the Battery
Switch off the trimmer and remove the battery.
Make sure the battery is in a safe condition.
Observe the following points when packing the
battery:
The packaging must be non-conductive.
Make sure the battery cannot shift inside the
packaging.
Secure the packaging so that it cannot move.
The battery is subject to the requirements for the
transport of dangerous goods. The battery is
classified as UN 3480 (lithium-ion batteries) and
has been tested in accordance with UN Manual
of Tests and Criteria, Part III, sub-section 38.3.
For transport regulations see www.stihl.com/
safety-data-sheets
15 Storing
15.1 Storing the Trimmer
FSA 90
Switch off the trimmer, push retaining latch to
position
and remove the battery.
If a metal cutting attachment is mounted: Fit
the matching transport guard.
1
2
90
0000-GXX-4607-A0
Loosen the wing screw (1) and unscrew it until
the handlebar (2) can be rotated.
Turn the handlebar (2) through 90° and fold it
down.
Tighten down the wing screw (1) firmly.
Observe the following points when storing the
trimmer:
The trimmer is out of the reach of children.
The trimmer is clean and dry.
If you store the trimmer for more than 3
months: Remove the cutting attachment.
FSA 90 R
Switch off the trimmer, push retaining latch to
position
and remove the battery.
If a metal cutting attachment is mounted: Fit
the matching transport guard.
Observe the following points when storing the
trimmer:
The trimmer is out of the reach of children.
The trimmer is clean and dry.
If you store the trimmer for more than 3
months: Remove the cutting attachment.
15.2 Storing the Battery
STIHL recommends that you store the battery
with a charge between 40 % and 60 % (2 LEDs
glow green).
Observe the following points when storing the
battery:
Battery is out of the reach of children.
Battery is clean and dry.
Battery is in an enclosed space.
Store the battery separately from the trim‐
mer and charger.
Battery is in non-conductive packaging.
Battery is in a temperature range between
-10°C and +50°C.
16 Cleaning
16.1 Cleaning the Brushcutter
Switch off the brushcutter, push the retaining
latch to position
and remove the battery.
Clean the brushcutter with a damp cloth.
Clean vents with a paintbrush.
Remove foreign objects from the battery com‐
partment and clean the battery compartment
with a damp cloth.
Clean the electrical contacts in the battery
compartment with a paintbrush or soft brush.
16.2 Cleaning the Deflector and Cut‐
ting Attachment
Switch off the trimmer, push retaining latch to
position
and remove the battery.
Clean the deflector and cutting attachment
with a damp cloth or a soft brush.
16.3 Cleaning the Battery
Clean the battery with a damp cloth.
15 Storing English
0458-709-9821-D 41