Instruction Manual

1
2
0000-GXX-4598-A0
► Loosen the wing screw (1).
► Swing the bike handle (2) to the required posi‐
tion.
► Tighten down the wing screw (1) firmly.
FSA 90 R
The loop handle can be set to different positions
to suit the height and reach of the user.
► Switch off the brushcutter, push the retaining
latch to position and remove the battery.
1
2
a
0000-GXX-4597-A0
► Undo the screws (2).
► Move the loop handle (1) to the required posi‐
tion and check that the following conditions
are met:
–
If you are using a mowing head: a = no
more than 30 cm
–
If you are using a metal cutting attachment:
a = no more than 25 cm
► Tighten down the screws (2) so that the loop
handle (1) cannot be rotated on the shaft.
8.3 Balancing the Trimmer
0000-GXX-4596-A0
The cutting attachment should rest lightly on the
ground.
► Switch off the trimmer and push retaining latch
to position .
2
1
0000-GXX-7807-A0
► Connect the carrying ring (1) to the carabi‐
ner (2).
► Wait for the trimmer to stop swinging.
9 Removing and Fitting the
Battery
9.1 Inserting the battery
2
1
0000-GXX-4599-A0
► Insert the battery (1) up to the limit stop into
the battery compartment (2).
The battery (1) engages with a click and is
now locked.
9.2 Removing the Battery
► Stand the trimmer on a level surface.
► Hold one hand in front of the battery compart‐
ment to ensure the battery (2) does not fall
out.
1
1
2
0000-GXX-4600-A0
► Press both locking levers (1).
The battery (2) is unlocked and can be
removed.
9 Removing and Fitting the Battery English
0458-709-9821-D 37