Operation Manual

47FS 80, FS 80 R, FS 85, FS 85 R
English / USA
1)
STIHL recommends that this work be done by a
STIHL servicing dealer
* Not in all versions, market-specific
Maintenance Chart
Please note that the following maintenance intervals apply for normal operating
conditions. If your daily working time is longer than normal or cutting conditions
are difficult (very dusty work area etc.), shorten the specified intervals accordingly.
before starting work after finishing work or daily after each refueling stop weekly monthly every 12 months if problem if damaged as required
Complete machine
Visual inspection (condition, leaks)
XX
Clean
X
Control handle Check operation
XX
Air filter
Clean
XX
Replace
X
Pick up body in fuel tank
Check
X
Replace
XXX
Fuel tank Clean
XX
Carburetor
Check idle adjustment – the cutting
tool must not turn
XX
Readjust idle
X
Spark plug
Readjust electrode gap
X
Replace after about 100 operating
hours
Cooling inlets
Inspect
X
Clean
X
Spark arresting screen* in muffler
Check
XX
Replace
XX
All accessible screws and nuts
(not adjusting screws)
Retighten
X
Anti-vibration element
Check
X
Have replaced by servicing dealer
1)
X