Operation Manual

 /RRSKDQGOH
For easy control of machine during
cutting work.
 6WRSVOLGH
Switches the engine’s ignition
system off and stops the running
engine.
 7KURWWOHWULJJHULQWHUORFN
Must be depressed before the
throttle trigger can be activated.
 6WDUWHUJULS
The grip of the pull starter, which is
the device to start the engine.
 6SDUNSOXJERRW
Connects the spark plug to the
ignition wire.
 )XHOILOOHUFDS
For closing the fuel tank.
 0DFKLQHVXSSRUW
For resting machine on the ground.
 7KURWWOHFDEOH
Connect operater’s control grip to
the powerhead
 +DQGOHKRVH
For holding machine during starting
and cutting work.
 7KURWWOHWULJJHU
Controls the speed of the engine.
 &DUEXUHWRUDGMXVWPHQWVFUHZV
For tuning carburetor.
 )XHOSXPS
Provides additional fuel feed for a
cold start.
 $LUILOWHUFRYHU&KRNH
Covers the air filter element/Eases
engine starting by enriching mixture.
 0XIIOHU
Attenuates exhaust noises and
diverts exhaust gases away from
operater.
 'HIOHFWRU
The defector is designed to reduce
the risk of injury from foreign objects
flung backwards toward the operater
by the cutting tool and from contact
with the cutting tool.
 /LQHOLPLWLQJEODGH
Metal blade at the deflector in order
to keep the line of the cutting head
at the proper length.
 0RZLQJKHDG
The cutting head is intended to
supplement a lawn mower
(special accessory).
'HILQLWRQV
