Instruction Manual

FS-MM
English
11
N Push the locking pin (2) or Allen
wrench (2) as far as it will go into the
hole (3) in the gear – press gently
N Turn the shaft, nut or cutting
attachment until the locking pin
engages and the shaft is blocked
Fitting Mowing Head with Screw
Mounting
Keep the instruction leaflet for the
mowing head in a safe place.
N Screw the mowing head
counterclockwise on to the shaft (1)
as far as stop.
N Block the shaft.
N Tighten down the mowing head
firmly.
NOTICE
Remove the tool used to block the shaft.
Removing the Mowing Head
N Block the shaft.
N Unscrew the mowing head
clockwise.
Starting the Engine
Always follow the starting procedure
described in the MultiEngine instruction
manual.
N Secure the handlebar in the normal
operating position.
N Retract the wheels, if fitted – see
chapter on "Wheels" in MultiEngine
instruction manual.
N Retract the spur, if fitted.
1
002BA385 KN
Starting / Stopping the
Engine
469BA061 AS
469BA062 AS