Instruction Manual

ManualsBrandsSTIHL ManualsAttachmentsPair this trimmer attachment with your STIHL YARD BOSS® Wheel Kit for a quality, cost-effective trimmer mower

FS-MM

English

10

– Tighten down first screw firmly.

– Tighten down second screw firmly.

Mount the wheel guard.

N Attach the wheel guard to the

gearbox, while doing so, insert the

nose (1) into the recess (2) on the

wheel guard.

N Turn-in and tighten the screw (3).

Placing Power Tool on the Ground

N Shut off the engine.

N Turn the power tool so that the

cutting attachment mounting face is

pointing up.

Blocking the shaft

To mount and remove the cutting

attachments, the shaft (1) must be

blocked with the locking pin (2) or Allen

wrench (2). The parts are included in the

scope of delivery and are available as

special accessories.

Mounting the Deflector

2

3

1

9911BA007 KN

Mounting the Cutting

Attachment

9911BA009 KN

2

3

1

002BA569 KN

2