Instruction Manual

FS 70 C, FS 70 RC
English
22
N Loosen the screw (3).
Floating position
N Mowing heads and grass cutting
blades should just touch the ground.
Proceed as follows to adjust the floating
position:
N Move the carrying ring up or down
the drive tube – tighten the screw
moderately – let the unit go and wait
until is its balanced – then check the
floating position.
When the correct floating position has
been reached:
N Tighten down the screw on the
carrying ring firmly.
Detaching the unit from the harness
N Press down the bar on the
carabiner (1) and pull the carrying
ring (2) out of the carabiner.
Controls
Version with Bike Handle
1 Throttle trigger lockout
2 Throttle trigger
3 Stop switch with Run and 0 =Stop
positions. Press the stop switch to
switch off the ignition – see
"Function of stop switch and ignition
system".
002BA313 KN
1
2
1
2
002BA312 KN
Starting / Stopping the
Engine
1
002BA268 KN
2
3