Instruction Manual
Table Of Contents
- STIHL FS 55
- 1 Guide to Using this Manual
- 2 Safety Precautions and Working Techniques
- 2.1 Clothing and equipment
- 2.2 Transporting the machine
- 2.3 Refueling
- 2.4 Before starting
- 2.5 Starting the engine
- 2.6 Holding and guiding the machine
- 2.7 While working
- 2.8 Using mowing heads
- 2.9 When using metal cutting attachments
- 2.10 Vibrations
- 2.11 Maintenance and Repairs
- 2.12 Symbols on Deflectors
- 2.13 Shoulder strap
- 2.14 Mowing Head with Nylon Line
- 2.15 STIHL Polycut Mowing Head with Polymer Blades
- 2.16 Risk of Kickout (Blade Thrust) with Metal Cutting Attachments
- 2.17 Grass Cutting Blade
- 3 Approved Combinations of Cutting Attachment, Deflector, Handle and Harness
- 4 Mounting the Bike Handle
- 5 Mounting the Loop Handle
- 6 Fitting the Carrying Ring
- 7 Mounting the Deflector
- 8 Mounting the Cutting Attachment
- 9 Fuel
- 10 Fueling
- 11 Fitting the Harness
- 12 Balancing the Machine
- 13 Starting / Stopping the Engine
- 14 Transporting the Unit
- 15 Operating Instructions
- 16 Cleaning the Air Filter
- 17 Adjusting the Carburetor
- 18 Spark Plug
- 19 Engine Running Behavior
- 20 Storing the Machine
- 21 Sharpening Metal Cutting Blades
- 22 Maintaining the Mowing Head
- 23 Inspections and Maintenance by Dealer
- 24 Maintenance and Care
- 25 Minimize Wear and Avoid Damage
- 26 Main Parts
- 27 Specifications
- 28 Maintenance and Repairs
- 29 Disposal
- 30 EC Declaration of Conformity
002BA142 KN
1
2
1
For position of carrying ring see "Main Parts".
► Place the clamp (1) against the drive tube with
the tapped hole on the left (viewed from
engine).
► Squeeze the two ends of the clamp together
and hold in that position.
► Insert the M6x14 screw (2).
► Line up the carrying ring.
► Tighten down the screw firmly.
6.2 Polymer Version
1
002BA529 KN
For position of carrying ring see "Main Parts".
► Push the carrying ring (1) over the drive tube.
► Insert the M5 nut in the hex recess in the car‐
rying ring.
► Fit the M5x14 screw.
► Line up the carrying ring.
► Tighten down the screw firmly.
7 Mounting the Deflector
7.1 Use the right deflector
002BA262 KN
1
7 Mounting the Deflector English
0458-233-0121-H 15