Instruction Manual

FS 40, FS 40 C, FS 50, FS 50 C
English
22
N Hold the mowing head steady and
rotate the cap (1) counterclockwise
until it can be removed.
N Pull the spool (2) out of the mowing
head (3) and remove the remaining
line.
Assembling the mowing head
N Fit the empty spool in the mowing
head.
If the spring (4) has popped out:
N push it into the spool (2) until it
engages in position with an audible
click.
N Mount the mowing head – see
"Mounting the Mowing Head".
Winding line onto spool
N Use green-coded nylon line with a
diameter of 2 mm (0.08 in).
N Cut two 2 m (6ft 6in) lengths of
nylon line from the reel (special
accessory).
N Rotate the spool (2)
counterclockwise until the two arrow
points are in alignment.
N Push the straight end of each line
through one of the sleeves (5) in the
mowing head (3) until you feel a
noticeable resistance – and then
continue pushing as far as stop.
Schnur/LINE 1
681BA021 KN
1
2
3