Instruction Manual

FS 240, FS 240 R
English
45
Gearbox without Screw Plug
N If the gearbox has no screw plug:
gearbox is maintenance-free and
requires no re-lubrication.
Gearbox with Screw Plug
N If the gearbox has a screw plug (1):
Check grease level after every 25
hours of operation and re-lubricate if
necessary.
N Remove the screw plug (1).
N If no grease can be seen on the
inside of the screw plug (1): Screw
the tube (2) of STIHL gear lubricant
(special accessory) into the filler
hole.
N Squeeze no more than 5 g (1/5 oz)
grease into the gearbox.
NOTICE
Do not completely fill the gearbox with
grease.
N Unscrew the tube (2).
N Insert the screw plug (1) and tighten
it down firmly.
If the machine is to remain out of use for
approx. 3 months or more
N Drain and clean the fuel tank in a
well ventilated place
N Dispose of fuel in accordance with
the regulations and having regard
for the environment
N Run the engine until the carburetor
is dry. This helps to prevent the
carburetor diaphragms sticking
together.
N Remove, clean and inspect the
cutting attachment. Treat metal
cutting attachments with protective
oil.
N Thoroughly clean the machine
N Store the machine in a dry and safe
place, out of the reach of children
and other unauthorized users
Lubricating the Gearbox
0000-GXX-1156-A0
1
0000-GXX-1155-A0
1
0000-GXX-0536-A0
Storing the Machine