Operation Manual

FS 240, FS 240 R
English
19
The following STIHL attachment may be
mounted to the basic power tool:
Mounting Bike Handle with Swiveling
Handle Support
The machine is supplied with the
swiveling handle support already
mounted on the shaft. To mount the
handlebar it is necessary to remove the
clamp moldings.
Removing the clamp moldings
N Hold the lower clamp (1) and upper
clamp (2) firmly together.
N Release the wing screw (3) – the
clamps are loose once the wing
screw has been released. They are
pushed apart by the two
springs (4 and 5).
N Pull out the wing screw – the
washer (6) remains on the wing
screw.
Approved Power Tool
Attachments
Interchangeable
Attachment Application
BF Pick tines
228BA032 KN
BF
Mounting the Bike Handle