Instruction Manual

FS 111 RX
English
31
Maintenance and Care
The following intervals apply for normal operating conditions. If your daily working
time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
before starting work after finishing work or daily after each refueling stop weekly monthly every 12 months if problem if damaged as required
Complete machine
Visual inspection (condition, leaks) XX
Clean X
Control handle Function test XX
Air filter
Visual inspection XX
Replace
2)
X
Manual fuel pump (if fitted)
Check X
Have repaired by servicing dealer
1)
X
Pickup body (filter) in fuel tank
Have checked by servicing dealer
1)
X
Have replaced by servicing dealer
1)
XXX
Fuel tank Clean XX
Carburetor
Check idle adjustment – the cutting
attachment must not rotate
XX
Adjust idle speed X
Spark plug
Readjust electrode gap X
Replace after every 100 operating hours
Cooling inlets
Visual inspection X
Clean X
Cylinder fins Have cleaned by servicing dealer
1)
X
Valve clearance
If power is low or cranking effort very
high, have valve clearance checked
and, if necessary, adjusted by servicing
dealer
1)
XX
Spark arresting screen in muffler
Check XX
Clean or replace XX
All accessible screws and nuts (not adjust-
ing screws)
Re-tighten X