Instruction Manual
FS 111, FS 111 R
English
13
Approved Combinations
Select correct combination from the
table according to the cutting
attachment you intend to use.
WARNING
For safety reasons only the cutting
attachments, deflectors, handles and
harnesses shown in each row of the
table may be used together. No other
combinations are permitted because of
the risk of accidents.
Cutting Attachments
Mowing heads
1 STIHL SuperCut 20-2
2 STIHL AutoCut C 26-2
3 STIHL AutoCut 25-2
4 STIHL AutoCut 36-2
5 STIHL DuroCut 20-2
6 STIHL PolyCut 20-3
Metal cutting attachments
7 Grass cutting blade 230-2
(230 mm dia.)
8 Grass cutting blade 260-2
(260 mm dia.)
9 Grass cutting blade 230-4
(230 mm dia.)
10 Grass cutting blade 230-8
(230 mm dia.)
11 Brush knife 250-3
(250 mm dia.)
12 Chisel tooth circular saw blade 200-
22 (4112), chisel tooth circular saw
blade 200-22 HP (4001)
WARNING
Non-metal grass cutting blades, brush
knives and circular saw blades are not
approved.
Deflectors, Limit Stop
13 Deflector for mowing heads
14 Deflector with
15 skirt and blade, for mowing heads
16 Deflector without skirt and blade, for
metal cutting attachments 7 to 11
17 Limit stop for circular saw blades
Handles
18 Loop handle
19 Loop handle with
20 Barrier bar
21 Bike handle
Harnesses
22 Shoulder strap may be used
23 Shoulder strap must be used
24 Full harness may be used
25 Full harness must be used
The following STIHL attachments may
be used with the basic power tool:
Approved Power Tool
Attachments
Attachment
1)
Not approved for models with bike
handle
2)
Limited suitability for models with
bike handle
3)
It is not necessary to use the
shoulder strap
4)
Use handle hose supplied with the
machine
5)
Use barrier bar supplied with the
loop handle
Application
BF Cultivator
FCS
2) 3)
Edger
FH 145° Power scythe,
adjustable
HL 0°
1)
Long reach hedge
trimmer
HL 145°
2)
Hedge trimmer,
adjustable
HT
1)
Pole pruner
RG
5)
Weeder
SP
1) 4)
Special harvester
SP 10
1)
Special harvester