Owner's Manual

ManualsBrandsSTIHL ManualsTrimmersSTIHL FS 110

FS 110, FS 110 R

English

32

Full harness

N Put on the full harness (1).

N Adjust the length of the strap so that

the spring hook (2) is about a hand’s

width below your right hip.

N Balance the trimmer/brushcutter.

Attaching the unit to the harness

The type and style of the harness and

carabiner (spring hook) depend on the

market.

N Attach the carabiner (1) to the

carrying ring (2) on the drive tube.

N Loosen the screw (3).

Balancing the brushcutter

The unit is balanced differently,

depending on the cutting attachment

used.

Proceed as follows until the conditions

specified under "Floating positions"

have been met:

N Adjust the carrying ring.

N Tighten the screw moderately.

N Allow the unit to hang freely.

N Check the position obtained.

Balancing the

Trimmer/Brushcutter