Operation Manual

FG 3
English
16
Use only special saw chain sharpening
files. Other files have the wrong shape
and cut and are unsuitable for
sharpening saw chain.
Mounting the round file
N Place the selected file (1) in the
filing frame.
N Tighten down the screws (2)
moderately.
Adjusting the sharpening angle
N Determine the sharpening angle
from the table below
N Set sharpening angle (3)
The toothing of the clamping device is
5°.
N Position the tooth head of the
master cutter (4) approximately
under the middle of the stop
roller (5)
Aligning the filing frame
N Move the round file (6) downward
between the tooth face and depth
gauge of the master cutter by
swiveling and lifting the filing frame
564BA003 KN
1
2
2
Setting Up
Chain type Sharpening
angle
Rapid-Standard (RC...) 30°
Rapid-Micro (RM...) 30°
Rapid-Super (RS...) 30°
Picco-Micro (PM...) 30°
Picco-Super (PS...) 30°
Ripping
(RCX, RMX, PMX) 10°
3
566BA018 KN
5
4
566BA007 KN
6
566BA008 KN