Operation Manual

18
english
FG 3
Use the setting for the master cutter to
sharpen all the other cutters in the row.
Second row of cutters
After sharpening all the cutters in the
first row, reset the filing tool to sharpen
the second row as described in chapter
“Adjustments”.
After sharpening the first cutter in the
second row:
: Check the cutter length (A).
: If it differs from te length of the
master cutter, change the position
of the stop (3), resharpen and check
again.
: If the length is correct, sharpen all
cutters in the second row using this
setting.
Depth gauges
: Place the appropriate filing
gauge (1) (special accessory) on
the chain. If the depth gauge
projects above the filing gauge, it
has to be lowered.
566BA012 KN
A
3
566BA013 KN
Chain Pitch Filing Gauge
inch (mm) Part No.
1
/
4
(6,35) 1110 893 4000
3
/
8
PMN (9,32) 0000 893 4000
3
/
8
P (9,32) 1110 893 4000
0.325 (8,25) 1110 893 4000
3
/
8
(9,32) 1110 893 4000
0.404 (10,26) 1106 893 4000
566BA014 KN
1