Operation Manual

FG 2
English
18
N Set the filing angle – to sharpen the
left-hand row of cutters, turn the
guide to the right (clockwise).
N Tighten down the knurled nut.
N Position the master cutter (3) below
the center of the knurled nut (1).
Aligning the filing frame
N Position the round file (1) between
the side plate and depth gauge of
the master cutter by swinging and
lifting the filing frame.
N Turn the adjusting screw (2)
(counterclockwise to lower file –
clockwise to raise file) until about
1/4 of the file diameter projects
above the top plate.
N Turn the knurled nut (3) until the
stop (4) butts against the back of the
cutter to be sharpened (master
cutter).
564BA008 KN
2
3
564BA009 KN
1
1
564BA010 KN
2
564BA011 KN
564BA034 KN
4
3
564BA031 KN