Operation Manual

FG 2
English
15
N Secure the base plate to the bench
using either the wood screws (A)
provided or the screw clamps (B)
available as special accessories.
N Place the chain rest (1) on the base
plate (2)
N – the clamping lever (3) must face
away from the bench.
N Make sure the studs (4) engage the
holes.
N Insert the hex head screw (5)
through the center hole from above.
N Tighten down the wingnut (6) firmly.
N Position the filing frame (7) on the
swivel (8) so that the stop pin
engages the semi-circular slot.
N Tighten down the nut (9) firmly.
Mounting the Tool
564BA000 KN
A
B
44
564BA001 KN
1
2
3
6
5
564BA002 KN
9
8
7